03. Tsyrkov A. V., Kuznetsov P. M., Tsyrkov G. A., Yermokhin Ye. A., Moskvin V. K. Project and Operations Management of Machine-Building Production

UDK 621.01:658

DOI: 10.15507/0236-2910.028.201804.511-522

Project and Operations Management of Machine-Building Production

Alexander V. Tsyrkov
Professor, Chair of System Modeling and Computer-Aided Design, Moscow Aviation Institute (National Research University) (4 Volokolamskoe Shosse, Moscow 125993, Russia), D.Sc. (Engineering), ResearcherID: K-1128-2018, ORCID: https://orcid.org/0000-0002-2334-1962, This email address is being protected from spambots. You need JavaScript enabled to view it.

Pavel M. Kuznetsov
Professor, Chair of System Modeling and Computer-Aided Design, Moscow Aviation Institute (National Research University) (4 Volokolamskoe Shosse, Moscow 125993, Russia), D.Sc. (Engineering), ResearcherID: K-8831-2018, ORCID: https://orcid.org/0000-0001-9237-3848, This email address is being protected from spambots. You need JavaScript enabled to view it.

George A. Tsyrkov
Associate Professor, Chair of System Modeling and Computer-Aided Design, Moscow Aviation Institute (National Research University) (4 Volokolamskoe Shosse, Moscow 125993, Russia), Ph.D. (Engineering), ResearcherID: P-1620-2017, ORCID: https://orcid.org/0000-0001-9379-5380, This email address is being protected from spambots. You need JavaScript enabled to view it.

Yegor A. Yermokhin
Graduate, Chair of System Modeling and Computer-Aided Design, Moscow Aviation Institute (National Research University) (4 Volokolamskoe Shosse, Moscow 125993, Russia), ResearcherID: K-1122-2018, ORCID: https://orcid.org/0000-0003-2819-2318, This email address is being protected from spambots. You need JavaScript enabled to view it.

Valery K. Moskvin
Associate Professor, Chair of Metal Machines, Bauman Moscow State Technical University (5 2nd Baumanskaya St., Moscow 105005, Russia), Ph.D. (Engineering), ResearcherID: L-4930-2018, ORCID: https://orcid.org/0000-0001-5377-4390, This email address is being protected from spambots. You need JavaScript enabled to view it.

Introduction. The aim of this work is to develop the main guidelines of project and operations management at machine-building enterprises.
Materials and Methods. The authors reviewed the state of application of the project and operations management of machine-building production in the automated mode. The review showed the complexity of its application due to a large number of factors, which must be taken into account when implementing. An approach was developed that allows solving the task using the automation of analysis processes and decision-making in production management.
Results. The article establishes the main guidelines of the project and operations management, aimed at increasing productivity and reducing production costs based on modeling the state of production environment. It also defines the requirements for the model. A prognostic time model for forecasting the state of the enterprise production system has been developed.
Conclusions.The tasks have been solved in this article allow increasing the level of automation of the processes of project and operations management of the enterprise in the conditions of quick-change production. The implementation of the developed approach to project and operations management of the enterprise will allow streamlining the launch of products with a reduction in the amount of work in progress and increasing the productivity of output.

Keywords: technological process, project and operations management, design, prognostic model, production, labor intensity, productivity

For citation: Tsyrkov A. V., Kuznetsov P. M., Tsyrkov G. A., Yermokhin Ye. A., Moskvin V. K. Project and Operations Management of Machine-Building Production. Vestnik Mordovskogo universiteta = Mordovia University Bulletin. 2018;
28(4):511–522. DOI: https://doi.org/10.15507/0236-2910.028.201804.511-522

Contribution of the authors: А. V. Tsyrkov – academic guidance, formulation of the research task and analysis of literary data; P. M. Kuznetsov – development of the mathematical apparatus of the prognostic model; G. A. Tsyrkov – development of models of technological processes; Ye. A. Yermokhin – writing the draft, translation into English and editing; V. K. Moskvin – word processing, review of literary sources.

All authors have read and approved the final version of the paper.

Received 10.05.2018; revised 29.06.2018; published online 28.12.2018

REFERENCES

1. Kuznetsov P. M. Support of the stage of manufacturing the product in the conditions of small-scale and single production. Informatsionnye tekhnologii v proektirovanii i proizvodstve = Information Technologies in Design and Manufacturing. 2014; 1:40–44. (In Russ.)

2. Kuznetsov P. M. Operative development of the systems of technological design in machine-building production. Tekhnologiya mashinostroeniya = Technology of Mechanical Engineering. 2014; 5:40–43. (In Russ.)

3. Usov S. V., Sviridenko D. S., Kuznetsov P. M. Information support of design and technological design taking into account the tribological characteristics of the surface layer of machine parts. Informatsionnye tekhnologii v proektirovanii i proizvodstve = Information Technologies in Design and Production. 2015; 1:46–49. (In Russ.)

4. Usov S. V., Sviridenko D. S., Kuznetsov P. M. Information support of the process of laser welding of alloys of ferrous and non-ferrous metals. Informatsionnye tekhnologii v proektirovanii i proizvodstve = Information Technologies in Design and Production. 2015; 4:55–58. (In Russ.)

5. Lopota A. V., Tsyrkov A. V. Construction of the system of design and operational management of the scientific and production machine-building complex. Oboronnyy kompleks – nauchno-tekhnicheskomu progressu Rossii = Defense Complex to Scientific and Technical Progress of Russia. 2016; 2:47–55. (In Russ.)

6. Lopota A. V., Tsyrkov A. V., Tsyrkov G. A. Implementation of the system of project-operational management of the enterprise. Organizational-methodical solutions. Informatsionnye tekhnologii v proektirovanii i proizvodstve = Information technologies in design and production. 2016; 3(163):9–18. (In Russ.)

7. Lopota A. V., Tsyrkov A. V., Tsyrkov G. A. Methods and tools of project-operational management of an machine-building enterprise. In: Proceedings of the 2017 International Conference “Quality Management, Transport and Information Security, Information Technologies” (IT&QM&IS). 2017. p. 536–539.

8. Tsyrkov A. V., Tsyrkov G. A. Intelligent components to support workflow in the design and production activities. In: Proceedings of the 2017 International Conference “Quality Management, Transport and Information Security, Information Technologies” (IT&QM&IS). 2017. p. 764–768.

9. Dean A. L. Data privacy and integrity requirements for online data management systems. In: Proceedings of the 1971 ACM SIGFIDET (now SIGMOD) Workshop on Data Description, Access and Control. New York: ACM; 1971. p. 279–298.

10. Date C. J., Hopewell P. File definition and logical data independence. In: Proceedings of the 1971 ACM SIGFIDET (now SIGMOD) Workshop on Data Description, Access and Control. New York: ACM; 1971. p. 117–138.

11. Date C. J., Hopewell P. Storage Structure and Physical Data Independence. In: Proceedings of the 1971 ACM SIGFIDET (now SIGMOD) Workshop on Data Description, Access and Control. New York: ACM; 1971. p. 139–168.

12. Kuzmin V. V., Maksimovskiy D. E. Choice of technological bases on the basis of solving a direct problem of dimensional analysis. Vestnik MGTU “STANKIN” = MSTU STANKIN Bulletin. 2012; 2:64–69.

13. Maksimovskii D. E. Automation of process design by design-technological parameterization. Russian Engineering Research. 2011; 31(9):870–872.

14. Kalyakulin S. Yu. Algorithm for calculating the parameters of the initial blank in the SITEP MO automated design system. Russian Engineering Research. 2014; 34(11):713–715.

15. Baibakov S. V. System of complex automation of technological preparation of production. Programmnye produkty i sistemy = Software Products and Systems. 2010; 1:85–87. (In Russ.)

16. Brovtsin V. N.Choice of the method of adaptive control and the structure of customizable models of technological processes of agricultural production. Tekhnologii i tekhnicheskie sredstva mekhanizirovannogo proizvodstva produktsii rastenievodstva i zhivotnovodstva = Technologies and Technical Means of Mechanized Production of Crop and Livestock Production. 1996; 66:45–54. (In Russ.)

17. Akashev Z. T.Methodology of improvement and selection of the structure of mining enterprises technological processes. Tyazheloye mashinostroeniye = Heavy Engineering. 2005; 12:17–19. (In Russ.)

18. Kuznetsov P. M., Moskvin V. K. Information and technological support of flexible industrial production. Innovatsionnaya nauka = Innovative Science. 2016; 1(2):67–72. (In Russ.)

19. Kuznetsov P. M., Moskvin V. K. Management of a purposeful environment for the conduct of manufacturing of products. Informatsionnye tekhnologii v proektirovanii i proizvodstve = Information Technology in Design and Production. 2016; 1:58–64.

20. Kuznetsov P. M., Moskvin V. K. Operative management of individual production. Vestnik MGTU “STANKIN” = MSTU STANKIN Bulletin. 2018; 1:18‒22. (In Russ.)

21. Kuznetsov P. M., Tsyrkov G. A. Purpose-oriented environment of project-operational management. Informatsionnye tekhnologii v proektirovanii i proizvodstve = Information Technologies in Design and Production. 2017; 4:10–14.

22. Land A. H., Doig A. G. An automatic method of solving discrete programming problems. Econometrica. 1960; 28(3):497–520.

23. Meguid S. A. Integrated Computer-Aided Design of Mechanical Systems. London: Elsevier Applied Science; 1987. 196 p.

24. Kuznetsov P. M., Moskvin V. K., Fedorov V. A. Information environment of technological processes support in machine-building production. Vestnik Tambovskogo universiteta = Tambov University Bulletin. 2017; 22(1):56–59. (In Russ.)

This work is licensed under a Creative Commons Attribution 4.0 License.