To download article.UDK 621.31:004.942
DOI: 10.15507/2658-4123.030.202002.287-299
This article by Sergey Yu. Kalyakulin (This email address is being protected from spambots. You need JavaScript enabled to view it.), Vladimir V. Kuzmin (This email address is being protected from spambots. You need JavaScript enabled to view it.), Eduard V. Mitin (This email address is being protected from spambots. You need JavaScript enabled to view it.), Sergey P. Suldin (This email address is being protected from spambots. You need JavaScript enabled to view it.), Tatyana B. Tyurbeeva (This email address is being protected from spambots. You need JavaScript enabled to view it.) has been retracted (i.e. withdrawn from the press) by the editor with permission of the publisher. The reason for the article retraction is detection of large-scale borrowings from the book: Kuzmin V.V., Skhirtladze A.G. [Mathematical Modeling of Technological Processes of Assembly and Machining of Mechanical Engineering Products]. Moscow: Higher School Publ.; 2008. 280 p. ISBN: 978-5-06-004837-7 (In Russ.)
Synthesis of the Structure of Technological Processes
Sergey Yu. Kalyakulin
Associate Professor of Chair of Mechanical Engineering Technology of Ruzayevka Institute of Engineering, National Research Mordovia State University (68 Bolshevistskaya St., Saransk 430005, Russia), Ph.D. (Engineering), Researcher ID: O-6519-2017, ORCID: https://orcid.org/0000-0003-0644-7746, This email address is being protected from spambots. You need JavaScript enabled to view it.
Vladimir V. Kuzmin
Professor of Chair of Mechanical Engineering Technology of Ruzayevka Institute of Engineering, National Research Mordovia State University (68 Bolshevistskaya St., Saransk 430005, Russia), D.Sc. (Engineering), Researcher ID: V-5405-2017, ORCID: https://orcid.org/0000-0001-6318-8563, This email address is being protected from spambots. You need JavaScript enabled to view it.
Eduard V. Mitin
Associate Professor of Chair of Mechanical Engineering Technology of Ruzayevka Institute of Engineering, National Research Mordovia State University (68 Bolshevistskaya St., Saransk 430005, Russia), Ph.D. (Engineering), Researcher ID: V-5383-2017, ORCID: https://orcid.org/0000-0002-9899-3420, This email address is being protected from spambots. You need JavaScript enabled to view it.
Sergey P. Suldin
Head of Chair of Mechanical Engineering Technology of Ruzayevka Institute of Engineering, National Research Mordovia State University (68 Bolshevistskaya St., Saransk 430005, Russia), Ph.D. (Engineering), Associate Professor, Researcher ID: V-5381-2017, ORCID: https://orcid.org/0000-0002-8159-6322, This email address is being protected from spambots. You need JavaScript enabled to view it.
Tatiana B. Tyurbeeva
Associate Professor of Chair of Information Technology and Computer Systems, Moscow State University of Technology “STANKIN” (1 Vadkovskiy Pereulok, Moscow 127994, Russia), Ph.D. (Engineering), Researcher ID: V-5050-2017, ORCID: https://orcid.org/0000-0001-6693-5974, This email address is being protected from spambots. You need JavaScript enabled to view it.
Introduction. The purpose of the study is to increase the level of automation of the technical documentation development through solving a problem of synthesis of the structure of technological processes.
Materials and Methods. The authors reviewed the current status of the issue of developing the automated structure for technological processes that have shown the complexity of its formalization because of a considerable quantity of factors which must be considered in developing. The algorithm for solving these tasks based on synthesis of technological processes has been developed.
Results. The authors identified the relations between the parameters of the structure of technological processes based on the formation of many admissible transitions. The generalized algorithm on the basis of the synthesis is developed.
Discussion and Conclusion. The tasks solved in this article allow increasing the level of automation of calculation of the parameters in systems of automated designing. The implementation of the algorithm for designing technological processes, which is developed on the basis of synthesis, allows increasing the general level of automation of designing technological processes.
Keywords: structure, synthesis, transitions, models, binary relation, algorithm, method
For citation: Kalyakulin S.Yu., Kuzmin V.V., Mitin E.V., et al. Synthesis of the Structure of Technological Processes. Inzhenerernyye tekhnologii i sistemy = Engineering Technologies and Systems. 2020; 30(2):287-299. DOI: https://doi.org/10.15507/2658-4123.030.202002.287-299
Contribution of the authors: S. Yu. Kalyakulin – development of an algorithm for the structure of technological processes based on synthesis; V. V. Kuzmin – scientific management, research agenda setting; E. V. Mitin – literature analysis; S. P. Suldin – process modeling development; Т. B. Tyurbeeva – writing the text, building a binary relationship graph.
All authors have read and approved the final manuscript.
Received 18.11.2019; revised 20.01.2020; published online 30.06.2020
REFERENCES
1. Milovzorov O.V. Implementation of the Principles of Synthesis of Technological Processes from a Generalized Structure Based on the T-Flex Technology System. Vestnik Ryazanskogo gosudarstvennogo radiotekhnicheskogo universiteta = Ryazan State Radio Engineering University Bulletin. 2015; (54):133-138. (In Russ.)
2. Lutov A.G., Ryabov Yu.V., Shaydullin R.I., et al. Intellectual Control of Processes of Technological Preparation of Machine-Building Production. Vestnik Yuzhno-Uralskogo gosudarstvennogo universiteta. Seriya: Kompyuternye tekhnologii, upravlenie, radioelektronika = South Ural State University Bulletin. Series: Computer Technology, Automatic Control, Radio Electronics. 2017; 17(3):117-124. (In Russ.) DOI: https://doi.org/10.14529/ctcr170312
3. Mitin S.G., Bochkarev P.Yu. Models and Methods of Automation of Procedures for Development of Structures of Technological Operations Implemented on the Equipment of the Large Group. Izvestiya vysshikh uchebnykh zavedeniy. Povolzhskiy region. Tekhnicheskie nauki = University Proceedings. Volga Region. Engineering Sciences. Computer Science. 2018; (2):119-130. (In Russ.) DOI: https://doi.org/10.21685/2072-3059-2018-2-11
4. Igrusha V.A., Sosinskaya S.S. Formalization of Description of Technological Processes for Manufacturing of Machine-Building Parts on the Basis of Ontology and Object-Oriented Databases. Ontologiya proektirovaniya = Ontology of Designing. 2017; (1):77-88. (In Russ.) DOI: https://doi.org/10.18287/2223-9537-2017-7-1-77-88
5. Novikov O.A., Baybakov S.V. Methods for Selecting Technological Bases when Designing Machining Processes. Upravlenie kachestvom v neftegazovom komplekse = Quality Management in Oil and Gas Complex. 2009; (4):73-75. (In Russ.)
6. Baybakov S.V. Complex Automation System of Process Planning. Programmnye produkty i sistemy = Software & Systems. 2010; (1):28. Available at: http://www.swsys.ru/index.php?page=article&id=2437&lang= (accessed 27.04.2020). (In Russ.)
7. Kalyakulin S.Yu., Kuzmin V.V., Mitin E.V., et al. Designing the Structure of Technological Processes Based on Synthesis. Vestnik Mordovskogo universiteta = Mordovia University Bulletin. 2018; 28(1):77-84. (In Russ.) DOI: https://doi.org/10.15507/0236-2910.028.201801.077-084
8. Kuzmin V.V., Maksimovskiy D.E. Choice of Technological Bases on the Basis of the Decision of a Direct Problem of the Dimensional Analysis. Vestnik MGTU “STANKIN” = MSTU STANKIN Bulletin. 2012; 2:64-69. Available at: http://www.stankin-journal.ru/ru/articles/590 (In Russ.) (accessed 27.04.2020). (In Russ.)
9. Maksimovskiy D.E. Automation of Process Design by Design-Technological Parameterization. Russian Engineering Research. 2011; 31(9):870-872. (In Eng.) DOI: https://doi.org/10.3103/S1068798X1109019X
10. Kalyakulin S.Yu. Algorithm for Calculating the Parameters of the Initial Blank in the SITEP MO Automated Design System. Russian Engineering Research. 2014; 34(11):713-715. (In Eng.) DOI: https://doi.org/10.3103/S1068798X14110082
11. Kuznetsov P.M., Khoroshko L.L. Digitization of Crushing and Milling Equipment Reconditioning. Gornyy informatsionno-analiticheskiy byulleten (nauchno-tekhnicheskiy zhurnal) = Mining Informational and Analytical Bulletin (Scientific and Technical Journal). 2019; (10):195-205. (In Russ.) DOI: https://doi.org/10.25018/0236-1493-2019-10-0-195-205
12. Tsyrkov A.V., Kuznetsov P.M., Tsyrkov G.A., et al. Project and Operations Management of Machine-Building Production. Vestnik Mordovskogo universiteta = Mordovia University Bulletin. 2018; 28(4):511–522. (In Russ.) DOI: https://doi.org/10.15507/0236-2910.028.201804.511-522
13. Butko A.O., Kuznetsov P.M. Building Information Models in Integrated Systems. Oboronnyy kompleks – nauchno-tekhnicheskomu progressu Rossii = Defense Complex to Scientific and Technical Progress of Russia. 2019; (3):20-25. Available at: http://izdat.ntckompas.ru/editions/for_readers/archive/article_detail.php?SECTION_ID=160&ELEMENT_ID=24794 (accessed 27.04.2020). (In Russ.)
14. Moskvin V.K., Kuznetsov P.M. Drive of a Technological Robot of a Turning Robotic Complex. Tehnologiya mashinostroeniya = Engineering Technology. 2018; (11):45-48. Available at: http://www.ictm.ru/info/11_254 (accessed 27.04.2020). (In Russ.)
This work is licensed under a Creative Commons Attribution 4.0 License.
