To download article.UDC 621.9
DOI: 10.15507/0236-2910.028.201801.077-084
This article by Sergey Yu. Kalyakulin (This email address is being protected from spambots. You need JavaScript enabled to view it.), Vladimir V. Kuzmin (This email address is being protected from spambots. You need JavaScript enabled to view it.), Eduard V. Mitin (This email address is being protected from spambots. You need JavaScript enabled to view it.), Sergey P. Suldin (This email address is being protected from spambots. You need JavaScript enabled to view it.), Tatyana B. Tyurbeeva (This email address is being protected from spambots. You need JavaScript enabled to view it.) has been retracted (i.e. withdrawn from the press) by the editor with permission of the publisher. The reason for the article retraction is detection of large-scale borrowings from the article: Kuzmin V.V., Maksimovskiy D.E. Choice of Technological Bases on the Basis of the Decision of a Direct Problem of the Dimensional Analysis. Vestnik MGTU STANKIN = MSTU STANKIN Bulletin. 2012; (2):64-69. (In Russ.)
Designing the Structure of Technological Processes Based on Synthesis
Sergey Yu. Kalyakulin
Associate Professor, Chair of Mechanical Engineering Technology, Ruzayevka Institut of Engineering, National Research Mordovia State University (68 Bolshevistskaya St., Saransk 430005, Russia), Ph.D. (Engineering), ResearcherID: O-6519-2017, ORCID: http://orcid.org/0000-0003-0644-7746, This email address is being protected from spambots. You need JavaScript enabled to view it.
Vladimir V. Kuzmin
Professor, Chair of Mechanical Engineering Technology, Faculty of Engineering Technologies and Equipment, Moscow State Technical University “STANKIN” (1st Vadkovskiy Pereulok, Moscow 1127994, Russia), D.Sc. (Engineering), ResearcherID: V-5405- 2017, ORCID: http://orcid.org/0000-0001-6318-8563, This email address is being protected from spambots. You need JavaScript enabled to view it.
Eduard V. Mitin
Associate Professor, Chair of Mechanical Engineering Technology, Ruzayevka Institut of Engineering, National Research Mordovia State University (68 Bolshevistskaya St., Saransk 430005, Russia), Ph.D. (Engineering), ResearcherID: V-5383-2017, ORCID: http://orcid.org/0000-0002-9899-3420, This email address is being protected from spambots. You need JavaScript enabled to view it.
Sergey P. Suldin
Head of Chair of Mechanical Engineering Technology, Ruzayevka Institut of Engineering, National Research Mordovia State University (68 Bolshevistskaya St., Saransk 430005, Russia), Ph.D. (Engineering), ResearcherID: V-5381-2017, ORCID: http://orcid.org/0000-0002-8159-6322, This email address is being protected from spambots. You need JavaScript enabled to view it.
Tatyana B. Tyurbeeva
Associate Professor, Chair of Information Technology and Computer Systems, Institute of Information Systems and Technologies, Moscow State Technical University “STANKIN” (1st Vadkovskiy Pereulok, Moscow 1127994, Russia), Ph.D. (Engineering), ResearcherID: V-5050-2017, ORCID: http://orcid.org/0000-0001-6693-5974, This email address is being protected from spambots. You need JavaScript enabled to view it.
Introduction: The aim of the work is to develop an algorithm for designing a process based on synthesis.
Materials and Methods: The paper gives an account of developing the structure of technological processes in an automated mode. The authors demonstrate the complexity of the formalization. Many factors must be taken into account when developing it. An algorithm was developed that makes it possible to solve the problems based on synthesis of technological processes.
Results: The authors found the relationship between the parameters of the structure of technological processes based on the formation of a set of permissible transitions. The relationships between structural parameters, such as “surface-technological methods”, “method-machine”, “tool-tool-tool” are revealed. A generalized algorithm based on the synthesis of the technological process of machining is developed.
Discussion and Conclusions: The present study allows slem forward increasing the level of automation of calculating parameters in computer aided design systems. The implementation of the algorithm of designing technological processes developed on the basis of synthesis will allow increasing the overall level of automation of technological processes design.
Keywords: technological process, structure, synthesis, system, binary relation, algorithm, surfaces
For citation: Kalyakulin S. Yu., Kuzmin V. V., Mitin E. V., Suldin S. P., Tyurbeeva T. B. Designing the Structure of Technological Processes Based on Synthesis. Vestnik Mordovskogo universiteta = Mordovia University Bulletin. 2018; 28(1):77–84. DOI: 10.15507/0236-2910.028.201801.077-084
This work is licensed under a Creative Commons Attribution 4.0 License.
