To download article.DOI: 10.15507/2658-4123.031.202104.500-517
Developing the Test Bench Software for the Technical Inspection of Volumetric Hydraulic Drives
Sergey V. Pyanzov
Lab Technician of the Technical Service Machines Chair of Institute of Mechanics and Power Engineering, National Research Mordovia State University (68 Bolshevistskaya St., Saransk 430005, Russian Federation), ORCID: https://orcid.org/0000-0002-5845-1635, Researcher ID: B-1548-2019, This email address is being protected from spambots. You need JavaScript enabled to view it.
Petr V. Senin
Head of the Technical Service Machines Chair of Institute of Mechanics and Power Engineering, National Research Mordovia State University (68 Bolshevistskaya St., Saransk 430005, Russian Federation), Dr.Sci. (Engr.), Professor, ORCID: https://orcid.org/0000-0003-3400-7780, Researcher ID: H-1219-2016, This email address is being protected from spambots. You need JavaScript enabled to view it.
Pavel A. Ionov
Associate Professor of the Technical Service Machines Chair of Institute of Mechanics and Power Engineering, National Research Mordovia State University (68 Bolshevistskaya St., Saransk 430005, Russian Federation), Cand.Sci. (Engr.), ORCID: https://orcid.org/0000-0001-9794-0071, Researcher ID: S-7146-2018, This email address is being protected from spambots. You need JavaScript enabled to view it.
Aleksey V. Stolyarov
Associate Professor of the Technical Service Machines Chair of Institute of Mechanics and Power Engineering, National Research Mordovia State University (68 Bolshevistskaya St., Saransk 430005, Russian Federation), Cand.Sci. (Engr.), ORCID: https://orcid.org/0000-0001-5898-0150, Researcher ID: G-8460-2016, This email address is being protected from spambots. You need JavaScript enabled to view it.
Alexander M. Zemskov
Associate Professor of the Technical Service Machines Chair of Institute of Mechanics and Power Engineering, National Research Mordovia State University (68 Bolshevistskaya St., Saransk 430005, Russian Federation), Cand.Sci. (Engr.), ORCID: https://orcid.org/0000-0002-1489-6077, Researcher ID: S-7748-2018, This email address is being protected from spambots. You need JavaScript enabled to view it.
Mikhail V. Ilyin
Associate Professor of the Chair of Electronics and Nanoelectronics of Institute of Electronics and Light Engineering, National Research Mordovia State University (68 Bolshevistskaya St., Saransk 430005, Russian Federation), Cand.Sci. (Engr.), ORCID: https://orcid.org/0000-0002-9495-2672, Researcher ID: P-2398-2016, This email address is being protected from spambots. You need JavaScript enabled to view it.
Igor N. Kravchenko
Professor of the Chair of Technical Service Department of Machinery and Equipment, Russian Timiryazev State Agrarian University (49 Timiryazevskaya St., Moscow 127550, Russian Federation), Dr.Sci. (Engr.), ORCID: https://orcid.org/0000-0002-1826-3648, Researcher ID: B-9463-2018, This email address is being protected from spambots. You need JavaScript enabled to view it.
Abstract
Introduction. The article describes the test bench specialized software, developed for technical inspection of domestic and foreign volumetric hydraulic drives in repair enterprises and service centers. The results of bench tests using a hydraulic bench and software are presented.
Materials and Methods For the application software development, G graphical programming language of the Laboratory Virtual Instrumentation Engineering Workbench (Lab- View) programming environment developed by the National Instruments Company has been used. The reliability of the results obtained has been confirmed by a series of bench tests of domestic and foreign volumetric hydraulic drives.
Results. There has been developed and implemented new test bench software for the technical inspection of hydraulic drives of different models from domestic and foreign manufacturers in repair plants and service centers. The software is used to capture, process and store data from the sensors during testing, to calculate and output measurement data, to conduct nonlaboratory analysis of the testing process in graphical, textual and video formats, to calibrate sensors, and to store the test results in the electronic library system. The specialized software runs under the Microsoft Windows 7 x86 (32-bit) operating system and is installed on a personal computer of the hydraulic bench data processing unit. The developed software is characterized by the ergonomics of the user interface, the ability to control all the parameters of diagnosing the tested volumetric hydraulic drives.
Discussion and Conclusion. Specialized software and the test bench permit high accurate monitoring of all technical condition parameters of the most common domestic and foreign volumetric hydraulic drives in accordance with the requirements of the manufacturers in the repair enterprises and service centers.
Keywords: test bench, specialized software, volumetric hydraulic drive, diagnostic parameters, technical inspection
Funding: The publication was prepared with the financial support of the Foundation for Assistance to Innovations. Project no. 4175GS1/68670 of July 23, 2021 “Development of the technological basis for the formation of electrospark coatings with high functional properties”.
The authors declare no conflict of interest.
For citation: Pyanzov S.V., Senin P.V., Ionov P.A., et al. Developing the Test Bench Software for the Technical Inspection of Volumetric Hydraulic Drives. Inzhenernyye tekhnologii i sistemy = Engineering Technologies and Systems. 2021; 31(4):500-517. doi: https://doi.org/10.15507/2658-4123.031.202104.500-517
Contribution of the authors:
S. V. Pyanzov – preparing the text with subsequent revision, analyzing literary data, software implementation of the software algorithm.
P. V. Senin – scientific guidance, developing the requirements list of the program.
P. A. Ionov – analyzing and revising the text, developing the program algorithm.
A. V. Stolyarov – preparing and analyzing literary data, finalizing the text, developing the program specification.
A. M. Zemskov – finalizing the text, formalizing the task of the program.
M. V. Ilyin – writing the source code of the program.
I. N. Kravchenko – conducting critical analysis of research, analysis and revision of text.
All authors have read and approved the final manuscript.
Submitted 21.07.2021; approved after reviewing 26.08.2021;
accepted for publication 30.09.2021
REFERENCES
1. Pyanzov S.V. [Improvement of the Bench and Methodology for Monitoring the Technical Condition of the Volume Hydraulic Drives of Agricultural Machinery]: Cand. Sci. dissertation. Saransk; 2021. 318 p. (In Russ.)
2.Ionov P.A., Senin P.V., Pyanzov S.V., et al. Developing a Stand for Evaluating Technical Condition of Volumetric Hydraulic Drives with a Hydraulic Loading Device. Inzhenernyye tekhnologii i sistemy = Engineering Technologies and Systems. 2019; 29(4):529-545. (In Russ., abstract in Eng.) doi: https://doi.org/10.15507/2658-4123.029.201904.529-545
3. Rylyakin E.G., Semov I.N., Kukharev O.N. The Influence of the Oxidative Polymerization Processes on the Energy Consumption Due to Friction in the Resource Defining Hydraulic Couplings Hydraulic Drive Mate. Research Journal of Pharmaceutical, Biological and Chemical Sciences. 2019; 49(1):1064-1069. Available at: https://www.rjpbcs.com/pdf/2019_10(1)/%5B138%5D.pdf (accessed 10.07.2021). (In Eng.)
4. Pavlov A.I., Tarbeev A.A., Egorov A.V., et al. Spectral Method for Monitoring the Technical Condition of Hydraulic Drives of Forest Harvester Machines. Journal of Physics: Conference Series. 2020; 1515. (In Eng.) doi: https://doi.org/10.1088/1742-6596/1515/4/042086
5. Tkáč Z., Kosiba J., Hujo L., et al. Experimental Hydraulic Device for the Testing of Hydraulic Pumps and Liquids. Tribology in Industry. 2018; 40(1):149-155. (In Eng.) doi: https://doi.org/10.24874/ti.2018.40.01.14
6. Bedotti A., Pastori M., Scolari F., Casoli P. Dynamic Modelling of the Swash Plate of a Hydraulic Axial Piston Pump for Condition Monitoring Applications. Energy Procedia. 2018; 148:266-273. (In Eng.) doi: https://doi.org/10.1016/j.egypro.2018.08.077
7. Shi L., Zhang W., Jiao H., et al. Numerical Simulation and Experimental Study on the Comparison of the Hydraulic Characteristics of an Axial-Flow Pump and a Full Tubular Pump. Renewable Energy. 2020; 153:1455-1464. (In Eng.) doi: https://doi.org/10.1016/j.renene.2020.02.082
8. Battarra M., Mucchi E. On the Assessment of Lumped Parameter Models for Gearpump Performance Prediction. Simulation Modelling Practice and Theory. 2019; 99:34-40. (In Eng.) doi: https://doi.org/10.1016/j.simpat.2019.102008
9. Petrishchev N.A., Kostomakhin M.N., Sayapin A.S., et al. Improving the Human-Machine-Environment Monitoring System and Operation Rules for Increasing Operational Tractor Reliability. Tekhnicheskiy servis mashin = Machinery Technical Service. 2020; (3):12-20. (In Russ., abstract in Eng.) doi: https://doi.org/10.22314/2618-8287-2020-58-3-12-20
10. Pavlov A.I., Tarbeev A.A. The Method of Determining the Strategy of Replacing High Pressure Hoses, Hydraulic Transport and Technological Machines. Sovremennye naukoemkie tekhnologii = Modern High Technologies. 2018; (4):108-112. (In Russ., abstract in Eng.) doi: https://doi.org/10.17513/snt.36968
11. Mandal S.K., Singh A.K., Verma Y., Dasgupta K. Performance Investigation of Hydrostatic Transmission System as a Function of Pump Speed and Load Torque. Journal of the Institution of Engineers (India): Series C. 2012; (93):187-193. (In Eng.) doi: https://doi.org/10.1007/s40032-012-0022-4
12. Michelson S., Mueller M., Schurman B. Hydraulic Test Bench Circuit Construction, Testing and Analysis. The Journal of Undergraduate Research. 2012; 10:116-127. Available at: http://openprairie.sdstate.edu/jur/vol10/iss1/9 (accessed 10.07.2021). (In Eng.)
13. Ding H., Zhao J. Performance Analysis of Variable Speed Hydraulic Systems with Large Power in Valve-Pump Parallel Variable Structure Control. Journal of Vibroengineering. 2014; 16(2):1042-1062. Available at: https://jvejournals.com/article/14974 (accessed 10.07.2021). (In Eng.)
14. Rylyakin E.G. The Effect of Physico-Chemical Composition of Micro-Particles Contamination of Diesel Fuel on the Technical Condition of the Power Supply System of Diesel Engines. Research Journal of Pharmaceutical. Biological and Chemical Sciences. 2019; 10(2):334-337. Available at: https://www.rjpbcs.com/pdf/2019_10(2)/[46].pdf (accessed 10.07.2021). (In Eng.)
15. Sumanov A.I. [Hydrotester]. Patent 123,478 Russian Federation. 2012 December 27. 5 p. Available at: https://www1.fips.ru/registers-docview/fips_servlet?DB=RUPM&DocNumber=123478&TypeFile=html (accessed 10.07.2021). (In Russ.)
16. Makarkin I.M., Dancov A.A., Filippova E.M., et al. The Experience of Introducing Equipment for Diagnosis, Quality Control of the Manufacture and Repair of Hydraulic Units, Power Transmission Equipment. Fundamentalnye i prikladnye problemy tekhniki i tekhnologii = Fundamental and Appliad Problems of Engineering and Technology. 2019; (4-2):135-144. Available at: https://www.elibrary.ru/item.asp?id=39217463 (accessed 10.07.2021). (In Russ., abstract in Eng.)
17. Elshorbagy K.A., Kandil H., Latif M.R. Development of a Multi-Functional Hydraulic Test Stand. Journal of Scientific and Engineering Research. 2018; 5(1):123-132. Available at: http://jsaer.com/download/vol-5-iss-1-2018/JSAER2018-05-01-123-132.pdf (accessed 10.07.2021). (In Eng.)
18. Pavlov A.I., Egorov A.V., Polyanin I.A., Kozlov K.E. A Method for Functional Diagnosis of Hydraulic Drives of Forest Machinery. International Journal of Environmental and Science Education. 2016; 11(18):11331-11340. Available at: http://www.ijese.net/makale/1530.html (accessed 10.07.2021). (In Eng.)
19. Rydberg K.-E. Hydraulic Fluid Properties and Their Impact on Energy Efficiency. In: The 13th Scandinavian International Conference on Fluid Power (Sweden) (3-5 June 2013). Linköping: Linköping University Electronic Press; 2013. p. 447-453. (In Eng.) doi: https://doi.org/10.3384/ecp1392a44
20. Chumakov P.V., Martynov A.V., Kolomeychenko A.V., et al. Evaluation of Technical Condition of Round Gear Hydraulic Pumps of Tractor Mounted Hydraulic Systems. Inzhenernyye tekhnologii i sistemy = Engineering Technologies and Systems. 2020; 30(3):426-447. (In Russ., abstract in Eng.) doi: https://doi.org/10.15507/2658-4123.030.202003.426-447
21. Ding H., Liu Y., Zhao Ya. A New Hydraulic Synchronous Scheme in Open-Loop Control: Load- Sensing Synchronous Control. Measurement and Control. 2020; (53):119-125. (In Eng.) doi: https://doi.org/10.1177/0020294019896000
22. Skorek G. The Opportunities for Getting Energy Savings in the Hydrostatic Drive System. Journal of KONES. Powertrain and Transport. 2014; 21(2):273-280. Available at: https://kones.eu/ep/2014/vol21/no2/Journal_of_KONES_2014_No._2_Vol._21_ISSN_1231-4005_SKOREK.pdf (accessed 10.07.2021). (In Eng.)
23. Pavlov A.I., Tarbeev A.A, Egorov A.V., et al. Method for Determining the Optimal Operating Time before Replacement of High-Pressure Hoses of Hydraulic Drives of Transport and Technological Machines. Journal of Physics: Conference Series. 2020; 1515. (In Eng.) doi: https://doi.org/10.1088/1742-6596/1515/4/042065
24. Ionov P.A., Senin P.V., Zemskov A.M., et al. [Development of Software for the Test Bench of the Technical Condition of Volumetric Hydraulic Drives]. Patent 187,833 Russian Federation. 2019 March 19. 9 p. Available at: https://www1.fips.ru/registers-doc-view/fips_servlet?DB=RUPM&DocNumber=187833&TypeFile=html (accessed 10.07.2021). (In Russ., abstract in Eng.)
25. Velichko S.A., Martynova E.G., Ivanov V.I. The Assessment of the Limit State of the Vacuum Piston Type Dough Divider by Oil Consumption. Inzhenernyye tekhnologii i sistemy = Engineering Technologies and Systems. 2020; 30(3):448-463. (In Russ., abstract in Eng.) doi: https://doi.org/10.15507/2658-4123.030.202003.448-463
This work is licensed under a Creative Commons Attribution 4.0 License.
