12. Yufkin Yu. G., Vesnushkina N. N. Dinamicheskaya model‌‌ rastochnogo instrumenta s plavayushchimi reztsovymi blokami .

LATEST ISSUE

For readers

For authors

FOR REVIEWERS

SOCIAL NETWORKS

Engineering Technologies and Systems is an open access journal, which means that all content is freely available without charge to the user or his/her institution. Users are allowed to read, download, copy, distribute, print, search, or link to the full texts of the articles, or use them for any other lawful purpose, without asking prior permission from the publisher or the author in accordance with the BOAI definition of open access.

All the materials of the “Engineering Technologies and Systems” journal are made available under a Creative Commons «Attribution» 4.0 license.

Useful Materials

To download article.

UDK 681.8:519.8

DOI: 10.15507/VMU.025.201501.101

DYNAMIC MODEL OF A BORING TOOL WITH FLOATING CUTTER BLOCKS

Yufkin Yurij Gavrilovich
( associate professor (docent) of Machine Tools and Systems chair of Ruzaevka Machine Engineering Institute, branch of Ogarev Mordovia State University (93, Lenin Str., Ruzaevka, Russia), Candidate of Sciences (PhD) degree holder in Engineering sciences, This email address is being protected from spambots. You need JavaScript enabled to view it.)

Vesnushkina Nina Nikolayevna
( associate professor (docent) of Machine Engineering Technology chair of Ruzaevka Machine Engineering Institute, branch of Ogarev Mordovia State University (93, Lenin Str., Ruzaevka, Russia), This email address is being protected from spambots. You need JavaScript enabled to view it. )

The article discusses the operation of fine boring with self-positioning tools as tools with a constructively implemented adaptation system. The authors establish the main sources of error of the technological system; sources of error shape of the holes in the workpiece; error of the workpiece in the machine. The mathematical model describing the process of boring selfaligning tools is created basing on a mathematical model of processing in the form of a closed technological system. Floating cutter blocks are regarded as completely rigid body relative to the tool body having one degree of freedom. General parameters characterizing the structure of a boring tool with floating cutter blocks are their number; the pressing force of each of the insical unit in the tool body; friction coefficients of cutting blocks in the tool body; the number of cutting elements disposed on each side of the incisal block. Components of the cutting forces are presented in the form of fixed and variable parts. The variable part of the components of the cutting force is presented in the form of a Fourier series. The formalization of the profile of the hole takes into account its error in the radial section (ovality, cut). Current coordinate describing the profile at a given point of the hole is a central angle. The resulting dynamic model of the boring tool with floating cutting blocks, which takes into account the variability of the components of the cutting force acting on each cutting element, can adequately describe his work in real time.

Keywords: mathematical model, boring tools, cutting element, cutting force components, cutting depth, form error.

For citation: Yufkin Yu. G., Vesnushkina N. N. Dinamicheskaya model‌‌ rastochnogo instrumenta s plavayushchimi reztsovymi blokami [Dynamic model of a boring tool with floating cutter blocks]. Vestnik Mordovskogo Universiteta – Mordovia University Bulletin. 2015, vol. 25, no. 1, pp. 101–104. DOI: 10.15507/VMU.025.201501.101

This work is licensed under a Creative Commons Attribution 4.0 License.