PDF To download article.

UDK 631.3.072

DOI: 10.15507/2658-4123.030.202001.008-020

 

Reliability of Machine-Tractor Aggregates Operation

 

Stanislav N. Shukhanov
Professor of Engineering Chair, Irkutsk State Agrarian University named after A. A. Ezhevsky (Village Molodezhnyy, Irkutsk Oblast 664038, Russia), D.Sc. (Engineering), ORCID: https://orcid.org/0000-0003-2134-6871, This email address is being protected from spambots. You need JavaScript enabled to view it.

Aleksandr V. Kuzmin
Professor of Technical Service and General Engineering Chair, Irkutsk State Agrarian University named after A. A. Ezhevsky (Village Molodezhnyy, Irkutsk Oblast 664038, Russia), D.Sc. (Engineering), ORCID: https://orcid.org/0000-0002-5669-2232, This email address is being protected from spambots. You need JavaScript enabled to view it.

Petr A. Boloyev
Professor of Engineering Chair, Buryat State University (24a Smolin St., Ulan-Ude 670000, Russia), D.Sc. (Engineering), ORCID: https://orcid.org/0000-0002-3940-1296

Introduction. The development of the agro-industrial complex is impossible without creating innovative techniques and technologies. The key role in technical support of agricultural production processes is played by machine-tractor aggregates. One of their most important operational characteristics is reliability, i.e. the ability to perform specified functions, keeping over time the values of the operational indicators within the required limits.
Materials and Methods. The object of the study is the reliability of machine-tractor aggregates. The methods of mathematical modeling were used for the study. The general patterns were used for special cases, taking into account the prediction of changes in parameters over time. The analytical description of machine-tractor aggregate operation reliability was based on stationary random and correlation functions. Generalized patterns were used to construct mathematical reliability models using the results of predecessor (analogue) tests. Optimal reliability of the machine-tractor aggregate operation was determined on the basis of the mathematical model of object resource.
Results. There are obtained analytical dependences for the prediction of changes in reliability parameters of machine-tractor aggregate operation over time. The methods for creating reliability mathematical models are developed. Conditions affecting the functioning of the research object are determined.
Discussion and Conclusion. The analysis and synthesis of research in this science field and the obtained mathematical models show that to achieve high results it is necessary to decrease the variance of factors affecting the reliability of machine-tractor aggregates.

Keywords: operation reliability, machine-tractor aggregate, mathematical modeling, optimization of parameters, tractor

For citation: Shukhanov S.N., Kuzmin A.V., Boloyev P.A. Reliability of Machine-Tractor Aggregates Operation. Inzhenerernyye tekhnologii i sistemy = Engineering Technologies and Systems. 2020; 30(1):8-20. DOI: https://doi.org/10.15507/2658-4123.030.202001.008-020

Contribution of the authors: S. N. Shukhanov – formulating the basic concept, goals and objectives of the study, making calculations, writing the draft, drawing the conclusions; A. V. Kuzmin – analysis of the research results, revision of the text, correction of conclusions; P. A. Boloyev – revision of the text, correction of conclusions.

All authors have read and approved the final manuscript.

Received 17.09.2019; revised 20.12.2019; published online 31.03.2020

 

REFERENCES

1. Shuhanov S.N. Interaction Elements of Particles of Grain Lots with Air during the Work of Tape Thrower. Agrarian Scientific Journal. 2015; 12:58-59. (In Eng.)

2. Samoilenko D., Marchenko A., Cho H.M. Improvement of Torque and Power Characteristics of V-Type Diesel Engine Applying New Design of Variable Geometry Turbocharger (VGT). Journal of Mechanical Science and Technology. 2017; 31(10):5021-5027. (In Eng.) DOI: https://doi.org/10.1007/s12206-017-0950-2

3. Ovchinnikov A.S., Mezhevova A.S., Novikov A.E., et al. Energy and Agrotechnical Indicators in the Testing of Machine-Tractor Units with Subsoiler. ARPN Journal of Engineering and Applied Sciences. 2017; 12(24):7150-7160. Available at: http://www.arpnjournals.org/jeas/research_papers/rp_2017/jeas_1217_6597.pdf (accessed 10.02.2020). (In Eng.)

4. Butenko A.F., Asaturyan A.V. To the Basis of an Use Efficiency of a Combined Belt Grain Thrower. Mezhdunarodny tekhniko-ekonomicheskiy zhurnal = The International Technical-Economic Journal. 2018; (1):80-86. Available at: http://www.tite-journal.com/fileadmin/fail/tite-journal_1_2018/Butenko.pdf (accessed 10.02.2020). (In Russ.)

5. Nuralin B., Bakushev A., Janaliev M., et al. Constructive-Regine Parameters of Rotor-Brush Cleaner for Tuberous Foots Dry Cleaning. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2018; 40(2). 113 p. (In Eng.)

6. Piven V.V. Determination of the Extent of Fraction in Air Separation of Grain Material. Journal of Physics Conference Series. 2018; 1059(1):012001. (In Eng.) DOI: https://doi.org/10.1088/1742-6596/1059/1/012001

7. Altukhov S.V., Shukhanov S.N. Analysis of Hydrodynamic Characteristics of Sprays of Nozzles of ICE. Traktory i selkhozmashiny = Tractors and Agricultural Machinery. 2018; (3):3-6. Available at: https://mospolytech.ru/storage/f033ab37c30201f73f142449d037028d/files/Traktory_i_selhozmashiny_No3_2018.pdf (accessed 10.02.2020). (In Russ.)

8. Shukhanov S.N., Kuzkin A.Yu., Skutelnik V.V., et al. Elements of Interaction of Gear Drives of Mechanical Transmissions of Auto-Tractor Machinery. Izvestiya Orenburgskogo gosudarstvennogo agrarnogo universiteta = Orenburg State Agrarian University Bulletin. 2018; (1):107-109. Available at: https://orensau.ru/images/stories/docs/izvestia/2018/Izvestia_1_69.pdf (accessed 10.02.2020). (In Russ.)

9. Druzyanova V.P., Dondokov Y.Zh., Osmonov O.M., et al. Mathematical Model of Biogas Treatment Process with a Zeolite Filter. International Journal of Civil Engineering and Technology. 2018; 9(9):280-288. Available at: https://www.researchgate.net/publication/328272717_Mathematical_model_of_biogas_treatment_process_with_a_zeolite_filter (accessed 10.02.2020). (In Eng.)

10. Boloyev P.A., Druzyanova V.P., Petrov N.V. Experimental Test Bench for the Study of a Power Plant with a Biogas Internal Combustion Engine. Traktory i selkhozmashiny = Tractors and Agricultural Machinery. 2019; (1):3-8. (In Russ.) DOI: https://doi.org/10.31992/0321-4443-2019-1-3-8

11. Druzyanova V.P., Semyonova O.P., Solovyov G.A. Procedures for Development and Justification of Filter Parameters for Biogas Cleaning To Use It in Internal Combustion Engines. Remont. Vosstanovlenie. Modernizatsiya = Repair. Restoration. Modernization. 2019; (1):11-14. Available at: http://www.nait.ru/journals/number.php?p_number_id=2869 (accessed 10.02.2020). (In Russ.)

12. Shukhanov S.N., Skutelnik V.V., Malomyzhev O.L. Technique of Carrying Out Heat Tests of Units of Transmission of the Autotractor Machinery of Agro-Industrial Complex. Mezhdunarodnyy tekhniko-ekonomicheskiy zhurnal = International Technical-Economic Journal. 2019; (3):77-83. (In Russ.) DOI: https://doi.org/10.34286/1995-4646-2019-66-3-77-83

13. Shukhanov S.N., Kuzmin A.V., Boloev P.A. Modeling of the Working Processes of the Machine- Tractor Units of Agro-Industrial Complex. Izvestiya Orenburgskogo gosudarstvennogo agrarnogo universiteta = Orenburg State Agrarian University Bulletin. 2019; (1):74-75. Available at: https://cyberleninka.ru/article/n/modelirovanie-rabochih-protsessov-mashinno-traktornyh-agregatov-agropromyshlennogo-kompleksa (accessed 10.02.2020). (In Russ.)

14. Vazhenin A.N., Aryutov B.A., Pasin A.V. Dynamical Model MTA (Machine-and-Tractor Unit) with Account for Conditions of Its Functioning. Traktory i selskohozyaystvennyie mashiny = Tractors and Agricultural Machinery. 2007; (9):21-23. (In Russ.)

15. Pasin A.V., Aryutov B.A., Koshelev R.V, et al. Seasonal Schedule and Pace of Execution of Field Mechanized Works. Mekhanizatsiya i elektrifikatsiya selskogo khozyaystva = Mechanization and Electrification of Agriculture. 2007; (11):2-4. (In Russ.)

16. Aryutov B.A., Novozhilov A.I., Pasin A.V., et al. Increasing Effectiveness of Production Processes in the Plant Industry. Tekhnika v selskom khozyaystve = Machinery in Agriculture. 2007; (6):50-51. (In Russ.)

17. Aryutov B.A., Pasin A.V., Baklanov A.V. Procedures for Multi-Criteria Optimization of Production Processes in Crop Production. Vestnik Federalnogo gosudarstvennogo obrazovatelnogo uchrezhdeniya vysshego professionalnogo obrazovaniya “Moskovskiy gosudarstvennyy agroinzhenernyy universitet imeni V.P. Goryachkin” = Bulletin of the Goryachkin Moscow State Agroengineering University. 2007; (3):61-65. (In Russ.)

18. Vazhenin A.N., Pasin A.V., Aryutov B.A. Optimal Seasonal Duration of Field Mechanized Works. Vestnik Federalnogo gosudarstvennogo obrazovatelnogo uchrezhdeniya vysshego professionalnogo obrazovaniya “Moskovskiy gosudarstvennyy agroinzhenernyy universitet imeni V.P. Goryachkin” = Bulletin of the Goryachkin Moscow State Agroengineering University. 2007; (3):67-69. (In Russ.)

19. Vazhenin A.N., Aryutov B.A., Pasin A.V. Traffic Control for Machine and Tractor Units. Traktory i selkhozmashiny = Tractors and Agricultural Machinery. 2008; (2):28-29. (In Russ.)

20. Vazhenin A.N., Aryutov B.A., Pasin A.V., et al. Streamlining of Production Processes in Crop Production. Mekhanizaciya i ehlektrifikaciya selskogo hozyajstva = Mechanisation and Electrification of Agriculture. 2008; (6):9-11. (In Russ.)

21.Vazhenin A.N., Aryutov B.A., Pasin A.V., et al. Optimization of Technical Equipment for Plant Production in View of Operation Requirements. Vestnik Federalnogo gosudarstvennogo obrazovatelnogo uchrezhdeniya vysshego professionalnogo obrazovaniya “Moskovskiy gosudarstvennyy agroinzhenernyy universitet imeni V.P. Goryachkin” = Bulletin of the Goryachkin Moscow State Agroengineering University. 2008; (3):72-76. Available at: https://cyberleninka.ru/article/n/optimizatsiya-tehnicheskoy-osnaschennosti-proizvodstvennyh-protsessov-v-rastenievodstve-s-uchetom-usloviy-ih-funktsionirovaniya (accessed 10.02.2020). (In Russ.)

22. Shkrabak S.N., Bechin A.V. Optimization of the Machine and Tractor Unit Operation in the Process Links of the Flow Lines. Selskiy Mekhanizator = Rural Mechanic. 2007; (5):40-41. Available at: http://selmech.msk.ru/507.htm#_ТЕХНИКЕ_–_ДОЛГИЙ_ВЕК (accessed 10.02.2020). (In Russ.)

23. Galiev I.G., Iskhakov I.R., Shamsutdinov A.R., et al. Management Operability of Equipment from the Conditions of Agricultural Production. Vestnik Kazanskogo GAU = Vestnik of Kazan State Agrarian University. 2010; (3):86-88. Available at: http://www.vestnik-kazgau.com/images/archive/2010/3/23_galiev.pdf (accessed 10.02.2020). (In Russ.)

24. Novozhilov A.I. To the Rationale of Intensive Methods of Efficiency Increasing of Use of Mechanized Technological Complexes. Vestnik Saratovskogo gosagrouniversiteta im. N.I. Vavilova = Vavilov Saratov State Agrarian University Bulletin. 2011; (7):52-55. Available at: http://agrojr.ru/index.php/asj/issue/view/135/2011_7 (accessed 10.02.2020). (In Russ.)

25. Novozhilov A.I., Aryutov B.A., Tikhonov A.A. Statistical Evaluation of Reliability Machine Tractor Units. Vestnik Ulyanovskoy gosudarstvennoy selskohozyaystvennoy akademii = Ulyanovsk State Agricultural Academy Bulletin. 2011; (2):108-110. Available at: https://vestnik.ulsau.ru/upload/iblock/923/vestnik-2011-2(14).pdf (accessed 10.02.2020). (In Russ.)

26. Nikolaenko A.V., Khvatov V.N., Sergeev V.N. Justification of Values of Optimal Operational Tolerances for Adjustment Parameters of Fuel Diesel Engines of Agricultural Tractors. Dvigatelestroenie = Engine Building. 1983; (7):45-48. (In Russ.)

 

 

Лицензия Creative Commons
This work is licensed under a Creative Commons Attribution 4.0 License.

Joomla templates by a4joomla