DOI: 10.15507/2658-4123.035.202501.013-029
Technology for Adjusting Working Tools of a Rotary Harvester Based on Fuzzy Modelling
Valery P. Dimitrov
Dr.Sci. (Eng.), Professor, Head of the Department of Quality Management, Don State Technical University (1 Gagarin Sq., Rostov-on-Don 344003, Russian Federation), ORCID: https://orcid.org/0000-0003-1439-1674, Researcher ID: E-4908-2018, Scopus ID: 57195505958, SPIN-code: 5991-4140, This email address is being protected from spambots. You need JavaScript enabled to view it.
Inna N. Nurutdinova
Cand.Sci. (Phys.-Math.), Associate Professor, Associate Professor of Department of Applied Mathematics, Don State Technical University (1 Gagarin Sq., Rostov-on-Don 344003, Russian Federation), ORCID: https://orcid.org/0000-0002-3375-1295, Researcher ID: HPF-3929-2023, Scopus ID: 57196043287, SPIN-code: 1139-1723, This email address is being protected from spambots. You need JavaScript enabled to view it.
Lyudmila V. Borisova
Dr.Sci. (Eng.), Professor, Head of Management Department Business-Processes, Don State Technical University (1 Gagarin Sq., Rostov-on-Don 344003, Russian Federation), ORCID: https://orcid.org/0000-0001-6611-4594, Researcher ID: E-4863-2018, Scopus ID: 7006547874, SPIN-code: 5718-9727, This email address is being protected from spambots. You need JavaScript enabled to view it.
Alexey A. Papchenko
Graduate Student of the Department of Quality Management, Don State Technical University (1 Gagarin Sq., Rostov-on-Don 344003, Russian Federation), ORCID: https://orcid.org/0009-0000-6436-8312, Researcher ID: LFU-8208-2024, Scopus ID: 58989751000, SPIN-code: 1738-1144, This email address is being protected from spambots. You need JavaScript enabled to view it.
Abstract
Introduction. The need to increase productivity of grain harvesting equipment and minimize crop losses has given rise to the increasing use of axial-flow combines (rotary harvester). The efficiency of harvesting operations depends on correct setting of the adjustable harvester parameters allowing full use of its design capabilities. For this reason, it is relevant to study the problems of optimal adjusting the working tools of a harvester operating in various environmental conditions.
Aim of the Study. The study was aimed at developing an approach to the choice of optimal values for the adjustable parameters of the rotor type grain harvesters.
Materials and Methods. Harvesting quality indices, adjustable parameters, and environmental factors are interdependent, so there has been used a linguistic approach to the description of the subject domain. Information about environmental conditions, the harvester technical state, interrelations between parameters and harvesting indicators is fuzzy that has led to the application of the theory of fuzzy sets to solve the problem of optimal choice of the adjustable parameters. The procedure of fuzzy logic inference has been performed in Fuzzy Logic Toolbox (MatLab) package.
Results. There are presented the results of the developed approach to the problem of operational presetting adjustable parameters of a rotary harvester when harvesting various grain crops under different environmental conditions. The problem solution concept has been developed on the basis of the fuzzy logic formalism. A linguistic description of the problem has been given. Models of the considered features in the form of membership functions are proposed, which adequately take into account the external conditions in which the harvester operates. Basic and extended term sets have been identified. The optimal models have been selected on the basis of the consistency analysis of fuzzy expert knowledge using the indicators of general and pair consistency of the models. The results of the solutions obtained have been illustrated. On the basis of collected and analyzed expert information there has been created a base of fuzzy expert knowledge including the fuzzy production rules for 12 adjustable parameters of TORUM harvester. Different combinations of the values of environmental factors have been considered, for which there has been given an inference about specific values of the adjustable parameters.
Discussion and Conclusion. The practical significance of the research carried out lies in the creation of a basis for an intelligent information system to help a rotary harvester operator in making decisions on choosing adjustable parameter values when harvesting various grain crops. The use of such a system in field conditions in combination with sensors for continuous monitoring of harvesting conditions and an automated image analysis system will allow for a prompt response to changing conditions, significantly increase work efficiency and reduce decision-making time. The implementation of such systems will significantly reduce the information load on the operator, as well as use operators with little practical experience during harvesting. The development of such information systems creates the preconditions for increasing the level of automation of intelligent control of a grain harvester and is an important stage in the implementation of the approach to unmanned control of a harvester.
Keywords: rotary grain harvester, adjustable parameters of a grain harvester, preliminary setting of working tools, axial flow threshing and separating device, linguistic approach, membership function, production rules, fuzzy inference
Conflict of interest: The authors declare no conflict of interest.
For citation: Dimitrov V.P., Nurutdinova I.N., Borisova L.V., Papchenko A.A. Technology for Adjusting Working Tools of a Rotary Harvester Based on Fuzzy Modelling. Engineering Technologies and Systems. 2025;35(1):13–29. https://doi.org/10.15507/2658-4123.035.202501.013-029
Authors contribution:
V. P. Dimitrov – ideas; formulation or evolution of overarching research goals and aims; verification, whether as a part of the activity or separate, of the overall replication/reproducibility of results/experiments and other research outputs; preparation, creation and presentation of the published work, specifically writing the initial draft (including substantive translation).
I. N. Nurutdinova – application of statistical, mathematical, computational and other formal techniques to analyse study data; development of methodology; creation of models.
L. V. Borisova – linguistic description of the subject domain, modeling of fuzzy expert knowledge; preparation, creation and presentation of the published work, specifically visualization/data presentation.
A. A. Papchenko – conducting a research and investigation process, specifically performing the experiments and data/evidence collection; creation of a fuzzy production rules base, using a package of applied programs Fuzzy Logic Toolbox (MatLab) to solve problem.
All authors have read and approved the final manuscript.
Submitted 11.09.2024;
revised 27.09.2024;
accepted 04.10.2024
REFERENCES
1. Zhalnin E.V., Chaplygin M.E. Improving the Design of Combine Harvesters by Harmonizing Their Basic Technical Parameters. Engineering Technologies and Systems. 2023;33(3):403‒416. (In Russ., abstract in Eng.) https://doi.org/10.15507/2658-4123.033.202303.403-416 Жалнин Э.В., Чаплыгин М.Е. Совершенствование конструкции зерноуборочных комбайнов путем гармонизации их базовых технических параметров. Инженерные технологии и систе- мы. 2023;33(3):403–416. https://doi.org/10.15507/2658-4123.033.202303.403-416
2. Pakhomov V., Chervaykov I., Kolin’ko A., Kambulov S, Hlystunov V. The Comparative Assessment Results of Winter Soft Wheat Grain Damage During Combine Harvesting. Lecture Notes in Networks and Systems. 2023;575:272–281. https://doi.org/10.1007/978-3-031-21219-2_28
3. Maslov G.G., Yudina E.M., Rinas N.A. Increase in Grain Combine Harvester Performance and in Quality of Harvesting Grain Crops. IOP Conference Series: Earth and Environmental Science. 2022;949:012109. https://dx.doi.org/10.1088/1755-1315/949/1/012109
4. Maslov G.G., Yudina E.M., Palapin A.V. The Directions of Effectiveness Improvement of Grain Harvesters. AIP Conference Proceedings. 2022;2503:030003. https://doi.org/10.1063/5.0100048
5. Aldoshin N., Didmanidze O., Mirzayev B., Mamatov F. Harvesting of Mixed Crops by Axial Rotary Combines. Tae 2019 – Proceeding of 7th International Conference on Trends in Agricultural Engineering. 2019:20–25. EDN: YMSVTO
6. Bakharev D., Pastukhov A., Volvak S., Kovalev S. Study of Seed Corn Threshing Process. Engineering for Rural Development. 2020;(19):1036–1041. https://doi.org/10.22616/ERDev.2020.19.TF243
7. Jasper S.P., Zimmermann G.G., Savi D., Neto L.S., Kmiecik L.L., Sobenko L.R. Operational Performance and Energy Efficiency of Axial Harvesters with Single and Double Rotor Systems in Soybean Seed Harvest. Ciencia e Agrotecnologia. 2021;45:е031720. https://doi.org/10.1590/1413- 7054202145031720
8. Zhalnin E.V., Godzhaev Z.A., Florentsev S.N. Conceptual Principles of Intelligent Agricultural Machines in the Case of Combine Harvester. Agricultural Machinery and Technologies. 2017;(6):9–16. (In Russ., abstract in Eng.) EDN: YLSVLC Жалнин Э.В., Годжаев З.А., Флоренцев С.Н. Концептуальные принципы интеллектуальных сельскохозяйственных машин на примере зерноуборочного комбайна. Сельскохозяйственные машины и технологии. 2017;(6):9–16. EDN: YLSVLC
9. Chen J., Ning X., Li Y., Yang G., Wu P., Chen S. A Fuzzy Control Strategy for the Forward Speed of a Combine Harvester Based on KDD. Applied Engineering in Agriculture. 2017;33(1):15–22. https:// doi.org/10.13031/aea.11299
10. Zhang K., Cao S., Shen H., Wang H., Xu X., Han T., et al. Fuzzy Control System for Load Stability of Intelligent Combine Harvester. IOP Conference Series: Materials Science and Engineering. 2018;439:052009. https://doi.org/10.1088/1757-899X/439/5/052009
11. Li W., Zhang K., Lv G., Dai H., Zhang C. An Improved Fuzzy Logic Control Method for Combine Harvester’s Cleaning System. Automatic Control and Computer Sciences. 2022;56:337–346. https:// doi.org/10.3103/S0146411622040058
12. Aldoshin N., Didmanidze O. Harvesting Lupinus Albus Axial Rotary Combine Harvesters. Research in Agricultural Engineering. 2018;64(4):209–214. https://doi.org/10.17221/107/2017-RAE
13. Maslov G.G., Trubilin E.I. Revisited Grain Harvesters Parameters Substantiation and Effectiveness of them. Agricultural Machinery and Technologies. 2016;(2):28–31. (In Russ., abstract in Eng.) EDN: VTPVNP Маслов Г.Г., Трубилин Е.И. К обоснованию параметров зерноуборочных комбайнов и их эф- фективности. Сельскохозяйственные машины и технологии. 2016;(2):28–31. EDN: VTPVNP
14. Lipovskiy M.I. Increasing the Efficiency of Threshing in an Axial Rotary Combine. Tractors and Agricultural Machinery. 2017;(4):45–50. (In Russ., abstract in Eng.) EDN: YTXOHH Липовский М.И. Повышение эффективности обмолота в аксиально-роторном комбайне. Тракторы и сельхозмашины. 2017;(4):45–50. EDN: YTXOHH
15. Špokas L., Steponavičius D., Butkus V. Reduction of Fuel Consumption of Two Rotors Axial Flow Combine Harvester. Journal of Food, Agriculture and Environment. 2014;12(2):329–333. Available at: https://clck.ru/3G4HbU (accessed 27.08.2024).
16. Jha K., Doshi A., Patel P., Shah M. A Comprehensive Review on Automation in Agriculture using Artificial Intelligence. Artificial Intelligence in Agriculture. 2019;2:1–12. https:// doi.org/10.1016/j.aiia.2019.05.004
17. Semeraro T., Mastroleo G., Pomes A., Luvisi A., Gissi E., Aretano R. Modelling Fuzzy Combination of Remote Sensing Vegetation Index for Durum Wheat Crop Analysis. Computers and Electronics in Agriculture. 2019;156:684–692. https://doi.org/10.1016/j.compag.2018.12.027
18. Sujaritha M., Annadurai S., Satheeshkumar J., Sharan S.K., Mahesh L. Weed Detecting Robot in Sugarcane Fields Using Fuzzy Real Time Classifier. Computers and Electronics in Agriculture. 2017;134:160–171. https://doi.org/10.1016/j.compag.2017.01.008
19. Turan I.D., Dengiz O., Ozkan B. Spatial Assessment and Mapping of Soil Quality Index for Desertification in the Semi-Arid Terrestrial Ecosystem using MCDM in Interval Type- 2 Fuzzy Environment. Computers and Electronics in Agriculture. 2019;164:104933. https:// doi.org/10.1016/j.compag.2019.104933
20. Prabakaran G., Vaithiyathan D., Ganesan M. Fuzzy Decision Support System for Improving the Crop Productivity and Efficient use of Fertilizers. Computers and Electronics in Agriculture. 2018;150:88–97. https://doi.org/10.1016/j.compag.2018.03.030
21. Dimitrov V., Borisova L., Nurutdinova I. Intelligent Support of Grain Harvester Technological Adjustment in the Field. Advances in Intelligent Systems and Computing. 2019;875. https:// doi.org/10.1007/978-3-030-01821-4_25
22. Omid M., Lashgari M., Mobli H., Alimardani R., Mohtasebi S., Hesamifard R. Design of Fuzzy Logic Control System Incorporating Human Expert Knowledge for Combine Harvester. Expert Systems with Applications. 2010;37(10):7080–7085. https://doi.org/10.1016/j.eswa.2010.03.010
23. Craessaerts G., Baerdemaeker de J., Missotten B., Saeys W. Fuzzy Control of the Cleaning Process on a Combine Harvester. Biosystems Engineering. 2010;106(2):103–111. https:// doi.org/10.1016/J.BIOSYSTEMSENG.2009.12.012
24. Dimitrov V.P., Borisova L.V., Nurutdinova I.N. Method for Determining the Initial Values of the Adjustable Parameters of the Combine Harvester Cutting Unit. Engineering Technologies and Systems. 2022;32(4):552‒566. (In Russ, abstract in Eng.) https://doi.org/10.15507/2658- 4123.032.202204.552-566 Димитров В.П., Борисова Л.В., Нурутдинова И.Н. Метод определения начальных значений регулируемых параметров жатвенной части зерноуборочного комбайна. Инженерные техно- логии и системы. 2022;32(4):552–566. https://doi.org/10.15507/2658-4123.032.202204.552-566
25. Dimitrov V.Р., Nurutdinova I.N., Papchenko A.A. Formation of a Knowledge Base for Selecting Parameter Values for the Working Parts of the TORUM Rotary Combine. E3S Web of Conferences. 2024;510:02001. https://doi.org/10.1051/e3sconf/202451002001
This work is licensed under a Creative Commons Attribution 4.0 License.