DOI: 10.15507/2658-4123.034.202403.444-460
Flow Structure and Periodic Processes in a Disc-Shaped Vortex Chamber of a Hydrodynamic Cavitator
Evgeni G. Ivanov
Cand.Sci. (Eng.), Associate Professor, Associate Professor of the Nizhny Novgorod State Agrotechnological University (97 Prospekt Gagarina, Nizhny Novgorod 603107, Russian Federation), ORCID: https://orcid.org/0000-0001-7105-3909, This email address is being protected from spambots. You need JavaScript enabled to view it.
ИIgor L. Vorotnikov
Dr.Sci. (Econ.), Professor, Rector of the Nizhny Novgorod State Agrotechnological University (97 Prospekt Gagarina, Nizhny Novgorod 603107, Russian Federation), ORCID: https://orcid.ord/0000-0003-3631-8275, This email address is being protected from spambots. You need JavaScript enabled to view it.
Alecsander V. Pasin
Dr.Sci. (Eng.), Professor, Professor of the Nizhny Novgorod State Agrotechnological University (97 Prospekt Gagarina, Nizhny Novgorod 603107, Russian Federation), ORCID: https://orcid.org/0000-0002-0797-4743, This email address is being protected from spambots. You need JavaScript enabled to view it.
Alexander V. Sedov
Master’s Student of the Nizhny Novgorod State Agrotechnological University (97 Prospekt Gagarina, Nizhny Novgorod 603107, Russian Federation), ORCID: https://orcid.org/0009-0001-3460-7420, This email address is being protected from spambots. You need JavaScript enabled to view it.
Maksim V. Oshurkov
Cand.Sci. (Eng.), Associate Professor, Associate Professor of the Nizhny Novgorod State Agrotechnological University (97 Prospekt Gagarina, Nizhny Novgorod 603107, Russian Federation), ORCID: https://orcid.org/0009-0006-5132-6440, This email address is being protected from spambots. You need JavaScript enabled to view it.
Abstract
Introduction. The essence of the acoustic – cavitation processes is that the liquid is passed through sound with a pressure at the wave surface of more than 3 bar that causes local breaks of the liquid in the vacuum phase of the wave and the collapse in the manometric phase. The opposite walls of each cavern in the collapse approach at a speed exceeding two speed of sound, due to which a high energy density is achieved at the meeting point, and what is especially valuable is the mutual transitions of energies from one form to another, unattainable under normal conditions, and, moreover, as inside cavitation area and near it. The novelty of the work is confirmed by the results of a periodic information and patent analysis, and by four patents received for inventions on the topic under consideration.
Aim of the Study. The study is aimed at improving the acoustic-cavitation qualities of a disk-shaped vortex chamber used as a liquid whistle.
Materials and Methods. In the study, there were used numerical modeling of flows in the FlowVision program, experimental determination of flow rates using a pitot tube, film method, removal of frequency response using SpectraPLUS 5.0, and visualization of flows and processes on optically transparent devices by the method of color indicators in stroboscopic lighting high-speed video shooting.
Results. The mechanism of sound generation and noise in the flow transiting through the device has been found. The corrective effect of pump pulsations f = 300 Hz on the sound generation mechanism was revealed. The disc-shaped character of the device, which encloses the input flow in cross section from three directions, contributes to creating a more expressive acoustic signal, forming two conjugate torus vortices along the shell that ensures uniformity of the circumferential flow, attenuation of longitudinal high-frequency oscillations f = 200 kHz, and the creation of periodic zones of increased pressure along the shell. The concentrated tangential entrance to the device determines the central asymmetry of the flows in it and a number of processes that create acoustic noise.
Discussion and Conclusion. The frequency of the useful acoustic signal in the vortex chamber is proportional to the speed of the transit flow, and the amplitude is proportional to the dimensions of the device. Along with the useful signal created by the interaction of the peripheral and input parts of the transit flow, noise of similar frequencies is created in the device. Other sources of noise generation are due to the presence of a concentrated tangential input. The formation of two conjugate torus vortices along the shell can be used as a means of controlling the process of interaction between parts of the transit flow. The disc-shaped vortex chamber combines the functions of sound generation and the ability to create a centrifugal field, which expands its technological capabilities.
Keywords: disk-shaped vortex chamber, liquid, cavitation, flows, structure, sound, frequency
Conflict of interest: The authors declare that there is no conflict of interest.
For citation: Ivanov E.G., Vorotnikov I.L., Pasin A.V., Sedov A.V., Oshurkov M.V. Flow Structure and Periodic Processes in a Disc-Shaped Vortex Chamber of a Hydrodynamic Cavitator. Engineering Technologies and Systems. 2024;34(3):444–460. https://doi.org/10.15507/2658-4123.034.202403.444-460
Authors contribution:
E. G. Ivanov – research supervision, writing of the draft.
I. L. Vorotnikov – managing the research project, analyzing and supplementing the text.
A. V. Pasin – searching for analytical materials in Russian and international sources.
A. V. Sedov – making the layout and the formatting of the article.
M. V. Oshurkov – collecting data and evidence, implementation of experiments.
All authors have read and approved the final manuscript.
Submitted 26.02.2024; revised 25.04.2024; accepted 06.05.2024
REFERENCES
1. Sivakumar M., Tang S.Y., Tan Kh.W. Cavitation Technology – A Greener Processing Technique for the Generation of Pharmaceutical Nanoemulsions. Ultrasonics Sonochemistry. 2014;21(6):2069–2083. https://doi.org/10.1016/j.ultsonch.2014.03.025
2. Athar M., Srotriya S. Velocity Distribution in Vortex Chamber at High Water Abstraction Ratio. Hydrologic Modeling. 2018;81:459–473. https://doi.org/10.1007/978-981-10-5801-1_32
3. Alves D.G., Teodoro da Silva J.T., Quintino D.B. Ataide C.H. Desander Mini-Hydrocyclones Applied to the Separation of Microspheres and Sand in Non-Nevtonian Fluid: Efficiencies and Drag Analysis. Separation and Purification Technology. 2020;234:116131. https://doi.org/10.1016/j.seppur.2019.116131
4. Padhi M., Mangadoddy N., Sreenivas T., Vakamalla T.R., Mainza A.N. Study on Multi-Component Particle Behavior in a Hydrocyclone Classifier Using Experimental and Computational Fluid Dynamics Technigues. Separation and Purification Technology. 2019;229:115698. https://doi.org/10.1016/j.seppur.2019.115698
5. Matsuno Y., Fukushima Y., Matsuo Sh., Hashimoto T., Setoguchi T., Kim H.D. Investigation on Temperature Separation and Flow Behaviour in Vortex Chamber. Journal of Thermal Science. 2015;24:149–154. https://doi.org/10.1007/s11630-015-0767-1
6. Matsuo Sh., Matsuno Y., Fukushima Y., Mamun M., Hashimoto T., Setoguchi T., et al. Experimental Study on Temperature Separation in Vortex Chamber. Procedia Engineering. 2015;105:464–471. https://doi.org/10.1016/j.proeng.2015.05.073
7. Potapov Yu.S. [Heat Generator and Device for Heating Liquids]. Patent 2045715 Russian Federation. 1995 October 10. (In Russ.) Available at: https://allpatents.ru/patent/2045715.html (accessed 11.04.2024).
8. Fisenko V.V. [The Method of Operation of the Ejector Heat Generating Unit]. Patent 2127832 Russian Federation. 1999 March 20. (In Russ.)
9. Mamaev A.N. [A Method for Converting Electrical Energy into Thermal Energy in an Ejector-Vortex Installation]. Patent 2253047 Russian Federation. 2004 August 20. (In Russ.)
10. Min J.C., Ki K.C., Gyu P.W. Cavitation Device of Underwater Moving Body and Underwater Moving Body Having the Same. Patent 2013298819 USA. 2014 November 11. Available at: https://patents.google.com/patent/US8881667B2/en (accessed 11.04.2024).
11. Karn A., Arndt R.E.A., Hong J. An Experimental Investigation into Supercavity Closure Mechanisms. Journal of Fluid Mechanics. 2016;789:259–284. https://doi.org/10.1017/jfm.2015.680
12. Rade V. Cavitation Generation. Patent 2015001315 Great Britain. 2015 August 1. Available at: https://patents.google.com/patent/WO2015001315A2/en (accessed 11.04.2024).
13. Rafiee S.E., Sadeghiazad M.M. Three-Dimensional CFD Simulation of Fluid Flow Inside a Vortex Tube on Basis of an Experimental Model – the Optimization of Vortex Chamber Radius. International Journal of Нeat and Technology. 2016;34(2):236–244. https://doi.org/10.18280/ijht.340212
14. Akhmetov D.G., Akhmetov T.D. Flow Structure in a Vortex Chamber. Journal of Applied Mechanics and Technical Physics. 2016;57(5):879–887. https://doi.org/10.1134/s0021894416050151
15. Akhmetov D.G., Akhmetov T.D., Pavlov V.A. Flow Structure in a Ranque-Hilsch Vortex Tube. Doklady Phusics. 2018;63:235–238. https://doi.org/10.1134/s1028335818060010
16. Wu P., Bai L., Lin W, Wang X. Mechanism and Dynamics of Hydrodynamic-Acoustic Cavitation (HAC). Ultrasonics Sonochemistry. 2018;49:89–96. https://doi.org/10.1016/j.ultsonch.2018.07.021
17. Qiu S., Ma X., Huang B., Li D., Wang G., Zhang M. Numerical Simulation of Single Bubble Dynamics under Acoustic Standing Waves. Ultrasonics Sonochemistry. 2018;49:196–205. https://doi.org/10.1016/j.ultsonch.2018.08.006
18. Ivanov E.G. [Hydrodynamic Cavitator]. Patent 2588298 Russian Federation. 2016 April 27. (In Russ.)
19. Ivanov E.G., Samodelkin A.G. [Heat Generator]. Patent 2594394 Russian Federation. 2016 August 20. (In Russ.)
Контент доступен под лицензией Creative Commons Attribution 4.0 License.