22. Dushin I. F., Maskajkina S. E., Polueshina N. I., Vavaeva N. G. Strength prediction for gear pump using SolidWorks simulation

LATEST ISSUE

For readers

For authors

FOR REVIEWERS

SOCIAL NETWORKS

Engineering Technologies and Systems is an open access journal, which means that all content is freely available without charge to the user or his/her institution. Users are allowed to read, download, copy, distribute, print, search, or link to the full texts of the articles, or use them for any other lawful purpose, without asking prior permission from the publisher or the author in accordance with the BOAI definition of open access.

All the materials of the “Engineering Technologies and Systems” journal are made available under a Creative Commons «Attribution» 4.0 license.

Useful Materials

To download article.

UDK 621.664.001.24

COMPUTER ANALYSIS FOR STRENGTH OF CASE FOR GEAR PUMP USING SOLIDWORKS SIMULATION

Dushin Igor’ Fedorovich (teaching assistant of Technical Disciplines chair of Machine Building Institute (Ruzayevka campus) of Ogarev Mordovia State University (Saransk, Russia), This email address is being protected from spambots. You need JavaScript enabled to view it.)

Maskajkina Svetlana Egorovna (associate professor (docent) of Machine Tools and Systems chair of Machine Building Institute (Ruzayevka campus) of Ogarev Mordovia State University (Saransk, Russia), This email address is being protected from spambots. You need JavaScript enabled to view it.)

Polueshina Natal’ja Ivanovna (associate professor (docent) of Machine Tools and Systems chair of Machine Building Institute (Ruzayevka campus) of Ogarev Mordovia State University (Saransk, Russia), This email address is being protected from spambots. You need JavaScript enabled to view it.)

Vavaeva Natal’ja Gennad’evna (student of Ogarev Mordovia State University (Saransk, Russia), This email address is being protected from spambots. You need JavaScript enabled to view it.)

The problem for case gear pump design, using FEM (finite elements method) is considering in this article. FEM realized in CAD/CAE SolidWorks Simulation software with revealed boundary conditions. The results are presented in the diagram form for stress and strain behavior and can be used in engineering practice for optimal parameters defining in weight minimization problem.

Keywords: the gear pump, the case, CAD/CAE SolidWorks Simulation, 3D model, durability, assurance factor.

For citation: Dushin I. F., Maskajkina S. E., Polueshina N. I., Vavaeva N. G. Prochnostnoj raschet korpusa shesterennogo nasosa s ispol’zovaniem SolidWorks Simulation [Strength prediction for gear pump using SolidWorks simulation]. Vestnik Mordovskogo Universiteta – Mordovia University Bulletin. 2014, no. 1, pp. 154 – 160.

This work is licensed under a Creative Commons Attribution 4.0 License.