To download article.UDK 62-2:621.92
DOI: 10.15507/VMU.025.201501.082
PIN CO-OPERATING OF UNSUPPORTED DISCRETE POLISHING MATERIAL WITH SURFACES OF WORKPARTS FROM POWDER-LIKE MATERIALS
Skryabin Vladimir Aleksandrovich
( professor of Machine Engineering Technology chair of Penza State University (40, Krasnaya Str., Penza, Russia), Doctor of Sciences degree holder in Engineering sciences, This email address is being protected from spambots. You need JavaScript enabled to view it.)
The subject of the article are regularities of the process of co-operation of details made of powder-like materials with a discrete abrasive layer. It is shown that many known methods of finish do not allow to a full degree to provide high quality of surfaces, of details of powder-like materials. There are numerous pores on the surfaces of such details, foods of wear debris of processing environment and also directly abra- sive grains can be charged in. The basic parameters of finish treatment of smooth and geometrically-complex surfaces are estimated: size of arc of contact, position of arc of contact in relation to the surface of detail, distribution of pressure on the arc of contact, size of force operating on single abrasive grain treatments, such as brands and gritness of abrasive filler, and » also composition of working liquids. On the basis of the analytical dependences and charts, acquired as a result of theoretical and experimental researches of process of detail with an abrasive layer, recommendations are given on the practical use of abrasive details made of powder-like materials, both on the stage of planning of equipment in the plan of achievement set the productivity and treatment and on the stage of the industrial use of present options.
Keywords: рrocess, co-operation, details, powder-like materials, poroelastic discrete abrasive layer, parameters, size of arc of contact, position of arc of contact in relation to the surface of detail, distribution of pressure on the arc of contact, size of force operating on a single grain, terms and methods of finish treatment, productivity and quality of treat- ment, planning stages, industrial unit.
For citation: Skryabin V. А. Kontaktnoe vzaimodeystvie nezakreplennogo diskretnogo shlifovalnogo materiala s poverkhnostyami obrabatyvaemykh detaley iz poroshkovykh materialov [Pin co-operating of unsupported discrete polishing material with surfaces of workparts from powder-like materials]. Vestnik Mordovskogo Universiteta – Mordovia University Bulletin. 2015, vol. 25, no. 1, pp. 82–95. DOI: 10.15507/ VMU.025.201501.082
This work is licensed under a Creative Commons Attribution 4.0 License.
