01. Skryabin VА. Treatment of details with different outward profile by close-settled polishing material.

LATEST ISSUE

For readers

For authors

FOR REVIEWERS

SOCIAL NETWORKS

Engineering Technologies and Systems is an open access journal, which means that all content is freely available without charge to the user or his/her institution. Users are allowed to read, download, copy, distribute, print, search, or link to the full texts of the articles, or use them for any other lawful purpose, without asking prior permission from the publisher or the author in accordance with the BOAI definition of open access.

All the materials of the “Engineering Technologies and Systems” journal are made available under a Creative Commons «Attribution» 4.0 license.

Useful Materials

To download article.

UDC 621.81:681.7.042

DOI: 10.15507/0236-2910.026.201603.292-311

TREATMENT OF DETAILS WITH DIFFERENT OUTWARD PROFILE BY CLOSE-SETTLED POLISHING MATERIAL

Vladimir A. Skryabin
professor of Mechanical Engineering chair, Penza State University (40, Krasnaya St., Penza, Russia), Dr.Sci. (Engineering), ORCID: orcid.org/0000-0001-7156-9198, This email address is being protected from spambots. You need JavaScript enabled to view it.

Introduction: The article deals with the treatment of different surfaces of details by unsupported polishing material. High efficiency of finish treatment of rotating body type details with difficult profile can be attained by treatment of details unsupported polishing material close-settled in a chamber static pressure of the compressed air through an elastic shell. The study of treatment quality of disks and fists was conducted in the experimental installation.
Materials and Methods: The workpieces were installed in a special frame with eccentricity in the spindle setup on the basis of the vertical or radial drilling machine. The camera reciprocating movement at a certain speed and amplitude. One of the main characteristics of the dynamic of processing pieces in the sealed environment is the fluid pressure on the workpiece surface by the elastic membrane. To solve the problem of elasticity equations were used in the first approximation.
Results: The author came from terms at the calculations that an abrasive environment is able limit equilibrium. The mathematical models are driven on determination of pressure of close-settled abrasive environment on a surface processed of details and cutting speeds. The schematics of methods of treatment and results of practical realization of finish treatment are presented with the purpose of achievements of the set size of roughness of the processed surfaces.
Discussion and Conclusions: The research have shown that the processing of parts rotating with planetary polishing process stable flow is provided under the condition that a portion of the workpiece surface deviation from circularity is able to communicate with the densified abrasive medium at least during the time necessary for a complete rotation about a central axis of the rotor. During this time the compacted abrasive media has time to react to the changing shape of the part profile.

Keywords: different profile details, unsupported polishing material, methods of treat¬ment, roughness of surfaces of details, pressure of close-settled abrasive environment, speed of cutting, close-settled abrasive environment, polishing

For citation: Skryabin VА. Treatment of details with different outward profile by close-settled polishing material. Vestnik Mordovskogo universiteta = Mordovia University Bulletin. 2016; 3(26):292-311. DOI: 10.15507/0236-2910.026.201603.292-311

This work is licensed under a Creative Commons Attribution 4.0 License.