Engineering Technologies and Systems - 07. Syrovatka V.I., Zhdanova N.V., Rasskazov A.N., Toropov D.I. Barothermal Processing of Animal Feed Ingredients

UDK 636.085.64

DOI: 10.15507/2658-4123.029.201903.428-442

Barothermal Processing of Animal Feed Ingredients

Vladimir I. Syrovatka
Head of Laboratory of Institute of Livestock Mechanization Branch of the Federal Scientific Agroengineering Center VIM (31 Poselok Znamya Oktyabrya, Poselenie Ryazanovskoe, Moscow 108823, Russia), Academician of RAS, ORCID: https://orcid.org/0000-0002-2846-9041, This email address is being protected from spambots. You need JavaScript enabled to view it.

Natalya V. Zhdanova
Research Engineer of Institute of Livestock Mechanization Branch of the Federal Scientific Agroengineering Center VIM (31 Poselok Znamya Oktyabrya, Poselenie Ryazanovskoe, Moscow 108823, Russia), ORCID: https://orcid.org/0000-0002-5144-044X, This email address is being protected from spambots. You need JavaScript enabled to view it.

Aleksandr N. Rasskazov
Leading Researcher of Institute of Livestock Mechanization Branch of the Federal Scientific Agroengineering Center VIM (31 Poselok Znamya Oktyabrya, Poselenie Ryazanovskoe, Moscow 108823, Russia), ORCID: https://orcid.org/0000-0001-9630-5404, This email address is being protected from spambots. You need JavaScript enabled to view it.

Dmitriy I. Toropov
Plenipotentiary Representative of the Republic of Mordovia to the President of the Russian Federation, Permanent Mission of the Republic of Mordovia to the President of the Russian Federation (29 Obraztsova St., Moscow 127018, Russia), This email address is being protected from spambots. You need JavaScript enabled to view it.

Introduction. The article substantiates the need for high-temperature processing of feed ingredients. Principles of operation and design features of the applied methods and equipment for feed production are considered. Phase transitions, along with advantages and energy, technological, and technical drawbacks are highlighted. The aim of the study is to justify a possibility of creating high-efficiency production lines using heat treatment of feeds by application of heat valves ensuring continuous loading of raw materials into a reactor and discharge of the treated feed at high pressures and temperatures.
Materials and Methods. It is proposed to transfer the process of barothermal processing to a higher zone of the phase diagram of the system p,t (pressure and temperature). This is a section of the superheated steam zone with temperature 300–374 °C, pressure 12–21 MPa and treatment exposure 30–60 seconds, which replaces costly processes of normalizing, expansion, extrusion and granulation. The change in enthalpy in the pressure range 0–21 MPa and temperature range 0–600 °C is shown. Thermal modes are presented as formulas which is the basic condition for the use of digital technologies.
Results. The design of the reactor with a thermal gate for loading and unloading, being the main unit of the production line of the feed heat treatment, was proposed. The results of the study are fundamental for the development of the sample flow low-capacity line.
Discussion and Conclusion. The transfer of the process of barothermic processing of feed into the zone of superheated steam allows for the transfer of poorly digestible elements of grain and legumes in easily digestible, pathogen-free feed. Advantages of the reactor and line include the user-friendly design, energy saving and possibility of implementation of advanced digital technologies.

Keywords: barothermal processing, animal feed, phase transitions, reactor, assembly line

For citation: Syrovatka V.I., Zhdanova N.V., Rasskazov A.N., Toropov D.I. Barothermal Processing of Animal Feed Ingredients. Inzhenernyye tekhnologii i sistemy = Engineering Technologies and Systems. 2019; 29(3):428-442. DOI: https:// doi.org/10.15507/2658-4123.029.201903.428-442

Contribution of the authors: V. I. Syrovatka – scientific management, writing the draft, development of the methodology, presentation of data in the text, supervising the data; N. V. Zhdanova – collecting data and evidence, studying the concept, preparing the drawings; A. N. Rasskazov – computer work, data collection and evidence, formal data analysis; D. I. Toropov – critical analysis and revision of the text, supervising the data.

All authors have read and approved the final manuscript.

Received 07.12.2018; revised 10.04.2019; published online 30.09.2019

REFERENCES

1. Izmailov A.Yu. Smart Technologies and Robotic Tools in Agricultural Production. Vestnik Rossiyskoy Akademii Nauk = Bulletin of the Russian Academy of Sciences. 2019; 89(5):536-538. (In Russ.) DOI: https://doi.org/10.31857/S0869-5873895536-538

2. Golikova T.A. Scientific Support of the Implementation of the Priorities of the Scientific and Technological Development of the Russian Federation. Speech by Deputy Prime Minister of the Russian Federation. Vestnik Rossiyskoy akademii nauk = Bulletin of the Russian Academy of Sciences. 2019; 89(4):311-314. (In Russ.) DOI: https://doi.org/10.31857/S0869-5873894311-314

3. Madau F.A., Furesi R., Pulina P. Technical Efficiency and Total Factor Productivity Changes in European Dairy Farm Sectors. Agricultural and Food Economics. 2017; 5(17):1-14. (In Eng.) DOI: http:// dx.doi.org/10.1186/s40100-017-0085-x

4. Kostlivý V., Fuksová Z., Carpentier A. Technical Efficiency and Its Determinants for Czech Livestock Farms. Agricultural Economics. 2019; 65(4):175-184. (In Eng.) DOI: https:// doi.org/10.17221/162/2018-AGRICECON

5. Latruffe L., Bravo-Ureta B.E. Subsidies and Technical Efficiency in Agriculture: Evidence from European Dairy Farms. American Journal of Agricultural Economics. 2017; 99(3):783-799. (In Eng.) DOI: https://doi.org/10.1093/Ajae/Aaw077

6. Kharmanda G. The Safest Point Method as an Efficient Tool for Reliability-Based Design Optimization Applied to Free Vibrated Composite Structures. Vestnik Donskogo gosudarstvennogo tehnicheskogo universiteta = Don State Technical University Bulletin. 2017; 17(2):46-55. (In Eng.) DOI: https:// doi.org/10.23947/1992-5980-2017-17-2-46-55

7. Ferket P.R. Technological Advances Could Make Extrusion an Economically Alternative to Pelling. Feedstuffs. 1991; 63(9):19-21. Available at: http://edepot.wur.nl/121964 (accessed 15.05.2019). (In Eng.)

8. Krolczyk J.B. Homogeneity Assessment of Multi-Element Heterogeneous Granular Mixtures by Using Multivariate Analysis of Variance. Tehnicki Vjesnik. 2016; 23(2):383-388. (In Eng.) DOI: https://doi.org/10.17559/TV-20151031183255

9. Best P. Extruder Operating Costs. Comparisons with Double Pelleting in a Dutch Feedmill. Feed International. 1993; 14(6):32-34. (In Eng.)

10. Wasserstein R.L., Lazar N.A. The ASA’s Statement on P-Values: Context, Process and Purpose. The American Statistician. 2016; 70(2):129-133. (In Eng.) DOI: https://doi.org/10.1080/00031305.2016.1154108

11. Krolczyk J.B. The Effect of Mixing Time on the Homogeneity of Multi-Component Granular Systems. Transactions of Famena. 2016; 40(1):45-56. Available at: https://hrcak.srce.hr/file/229037 (accessed 15.05.2019). (In Eng.)

12. Strielkowski W., Lisin E. Economic Aspects of Innovations in Energy Storage. International Journal of Energy Economics and Policy. 2017; 7(1):62-66. Available at: https:// www.econjournals.com/index.php/ijeep/article/view/3528 (accessed 15.05.2019). (In Eng.)

13. Khoshbin-e-Khoshnazar M.R. Ice Phase Transition as a Sample of Finite System Phase Transition. Physics Education. 2016; 32(2). Available at: https://www.physedu.in/uploads/publication/23/371/4.- Ice-Phase-transition-as-a-sample-of-finite-system-phase--transition.pdf (accessed 15.05.2019). (In Eng.)

14. Kovalchuk M.V., Naraykin O.S., Yatsishina E.B. Nature-Like Technologies: New Opportunities and New Challenges. Vestnik Rossiyskoy akademii nauk = Bulletin of the Russian Academy of Sciences. 2019; 89(5):455-465. (In Russ.) DOI: https://doi.org/10.31857/S0869-5873895455-465

15. Luht H., Dolud M., Zyabrev V. Hydrothermal Treatment of Soybeans. Kombikorma = Mixed Feeds. 2019; (1):31-34. Available at: http://kombi-korma.ru/arkhiv/no-01-19 (accessed 15.05.2019). (In Eng.)

This work is licensed under a Creative Commons Attribution 4.0 License.