Print

PDF To download article.

UDK 631.173(470.345)

DOI: 10.15507/0236-2910.028.201802.222-238

 

Research of Technical Service Enterprises for Promoting Equipment Reliability (Case Study of Agro-Industrial Complex of the Republic of Mordovia)

 

Vladimir A. Komarov
Professor, Chair of Technical Service of Machines, National Research Mordovia State University (68/1 Bolshevistskaya St., Saransk 640005, Russia), D.Sc. (Engineering), ResearherID: G-8673-2018, ORCID: http://orcid.org/0000-0003-1910-2923, This email address is being protected from spambots. You need JavaScript enabled to view it.

Introduction. Many planning solutions for the development of enterprise projects are partly defective. On the one hand, the solutions do not take into account the influence of many factors on building regulations; on the other, they ignore the relationship with the monitoring the technical state of objects in the process of maintenance and repair. The purpose of this study is to develop a system of models for promoting equipment reliability in the process of operation and maintenance at technical service enterprises to minimize construction costs and improve the reliability of equipment.
Materials and Methods. Monitoring the situational plans of repair and maintenance bases of enterprises and their compliance with modern requirements was carried out using the public cadastral map of the Republic of Mordovia of 2018. Dependencies of the average resource and the operating time on the rejection of the re-planning factors for various types of control and diagnostic and repair work were calculated using the example of the transmission of GAZ-SAZ-3507, GAZ-SAZ-2506 and GAZ-SAZ-2504 agricultural trucks. In the process of research, a multifactor mathematical model and software developed on a PC have been developed.
Results. To reduce construction costs of enterprises, a classification of building regulations for distances was developed. 1. In the range of 700–3,000 m: a) between units of equipment; b) between process equipment and various types of building elements. 2. In the range of 1,200–1,600 m with unilateral traffic of internal vehicles and 2,200–7,000 in the case of bilateral: a) the norms of the width of the driveways; b) the norms of the distances between two rows of equipment. Analysis of the dependencies showed that a decrease in the volume of control and diagnostic work (with a change in the redesign of the monitoring and diagnostic work of the КПК from 0 to 1.8) leads to a decrease in the time taken to eliminate the consequences of failure by 2.1 times, and the average pre-repair life – by 26 % . Reduction of the volume of preventive maintenance work (if the redevelopment factor of the repair work of the КПРК is changed from 0 to 4.2) leads to a decrease in the time taken to eliminate the consequences of a failure by a factor of 1.6, and the average dormant resource by 9 %. Optimal values of the КоптПК = 0,55 are established; КоптПРК = 1,05. Two main directions for development of projects of technical service enterprises were identified: 1) an increase in the scale and number of production zones and sites for outdoor truck wash, maintenance and diagnostics of complex equipment; 2) the development and placement of storage areas for agricultural machinery and logistics in a single production building that carries out various types of technical services.
Conclusions. Researches of the process of re-planning of control and diagnostic and repair influences carried out with the help of a mathematical model confirms the effectiveness of their joint application at technical service enterprises, especially before the periods of using cars in the machine and tractor complexes. The results of the research are recommended for specialists in the field of equipment technical service.

Keywords: situational plan, technical service, enterprise, building regulations of distances, reliability indicators, reliability, durability

For citation: Komarov V. A. Research of Technical Service Enterprises for Promoting Equipment Reliability (Case Study of Agro-Industrial Complex of the Republic of Mordovia). Vestnik Mordovskogo universiteta = Mordovia University Bulletin. 2018; 28(2):222–238. DOI: https://doi.org/10.15507/0236-2910.028.201802.222-238

The author has read and approved the final version of the paper.

 

REFERENCES

1. Korolkova A. P., Golubev I. G., Korolkov N. V.Organization and efficiency of service of agricultural machinery of foreign. Trudy GOSNITI = Works of GOSNITI. 2015; 119:129–132. (In Russ.)

2. Golubev I. G., Korolkova A. P. The reduction of the fleet of agricultural machinery and problems of their service. Trudy GOSNITI = Works of GOSNITI. 2015; 121:76–79. (In Russ.)

3. Chernoivanov V. I. [Engineering services of the AIC of Russia: Ensuring the implementation of the state program for the development of agriculture for 2013–2020]. Selskokhozyaystvennyye mashiny i tekhnologii = Agricultural Machines and Technologies. 2013; 1:2–7. (In Russ.)

4. Golubev I. G., Fadeev A. Yu., Makuev V. A. Tractors servicing quality assessment. Tekhnika i oborudovaniye dlya sela = Machinery and Equipment for Countryside. 2010; 7:40–41. (In Russ.)

5. Golubev I. G., Tabakov P. A. The experience in agricultural machinery parts reconditioning. Tekhnika i oborudovaniye dlya sela = Machinery and Equipment for Countryside. 2013; 2:39–40. (In Russ.)

6. Lyalyakin V. P., Golubev I. G. Prospects of recondition of agricultural machinery parts. Tekhnika i oborudovaniye dlya sela = Machinery and Equipment for Countryside. 2016; 4:41–43. (In Russ.)

7. Shelkovnikov S. A., Petukhova M. S., Nikolaenko N. N. Assessment of the state’s impact in the results of the agricultural production. British Journal for Social and Economic Research. 2016; 1(1):5–12.

8. Barsukova G. N. Appraisal of the results of the modern land reform of the Russian Federation based on tendency to deformation of the agricultural area. British Journal for Social and Economic Research. 2016; 1(1):13–22.

9. Kosyakova L. N., Popova A. L. Innovative policy in the agricultural sphere. British Journal for Social and Economic Research. 2016; 1(2):29–38.

10. Barsukova G. N., Mironenko L. A., Yurchnko K. A. Modeling of the planting acreage structure with regard to a maintenance of the soil fertility. British Journal for Social and Economic Research. 2016; 1(2):39–47.

11. Moiseyev A. V., Moiseyev V. V. Actions for increase in overall performance of the agrarian seedgrowing enterprise. British Journal for Social and Economic Research. 2016; 1(3):25–32.

12. Komarov V. A. [Justification of the rules for assigning the volumes of passing control and repair for vehicles transmissions]. Vestnik Mordovskogo universiteta = Mordovia University Bulletin. 2004; 14(1-2):140–147. (In Russ.)

13. Komarov V. A. [The impact of regional operating conditions on the formation of the structure and content of the system of maintenance and repair of machinery]. Vestnik Mordovskogo universiteta = Mordovia University Bulletin. 2004; 14(3-4):166–171. (In Russ.)

14. Komarov V. A. [Designation of technical criteria for the ultimate state of machine assemblies]. Vestnik Mordovskogo universiteta = Mordovia University Bulletin. 2005; 15(3-4):159–165.

15. Komarov V. A., Naumkin N. I., Nuyanzin Ye. A. The interdisciplinary projects in agricultural engineering education. Tekhnika i oborudovaniye dlya sela = Machinery and Equipment for Countryside. 2015; 10:41–43. (In Russ.)

16. Grigoryev A. V., Komarov V. A. Ensuring the life characteristics of repairing and processing equipment. Traktory i selkhozmashiny = Tractors and Agricultural Machinery. 2011; 10:43–45. (In Russ.)

17. Komarov V. A., Lezin P. P., Grigoryev A. V. Forecasting of service life of knots of repair and technological equipment in the enterprises of agrarian and industrial complex. Traktory i selkhozmashiny = Tractors and Agricultural Machinery. 2012; 9:46–48. (In Russ.)

18. Komarov V. A., Grigoryev A. V. Analysing the properties of hardened surfaces of knots’ parts of repair-technological equipment. Traktory i selkhozmashiny = Tractors and Agricultural Machinery. 2012; 10:44–46. (In Russ.)

19. Komarov V. A., Grigoryev A. V., Martyshkin A. P. Target functions of parameters optimization of technological equipment precision. Traktory i selkhozmashiny = Tractors and Agricultural Machinery. 2013; 7:44–47. (In Russ.)

20. Grigoryev A. V., Komarov V. A. Forecasting of parametric reliability of technological equipment units by output accuracy parameters. Traktory i selkhozmashiny = Tractors and Agricultural Machinery. 2013; 8:51–53. (In Russ.)

21. Komarov V. A., Grigoryev A. V. Modeling of controlled accuracy parameters of production machinery assemblies depending on the basic parts wear. Traktory i selkhozmashiny = Tractors and Agricultural Machinery. 2013; 12:16–19. (In Russ.)

22. Komarov V. A., Machnev V. A., Grigoriev A. V. Formation of reliable repair and processing equipment at service enterprises. Tekhnika i oborudovaniye dlya sela = Machinery and Equipment for Countryside. 2015; 5:33–36. (In Russ.)

23. Fomin A. I., Senin P. V., Komarov V. A., Nuyanzin E. A.Durability of coatings of crankshaft necks for motor and tractor machinery. Tekhnika i oborudovaniye dlya sela = Machinery and Equipment for Countryside. 2016; 225(2):44–48. (In Russ.)

24. Senin P. V., Machnev V. A., Komarov V. A., Ovchinnikov A. Yu., Vlaskin V. V. Reasoning for using repair-recovery impacts for turbochargers parts. Niva Povolzhya = Cornfield of Volga Region. 2017; 42(1):91–98. (In Russ.)

25. Fomin A. I., Komarov V. A., Nuyanzin E. A. Formation of operating surface layer for reliability of crankshafts of motor and tractor machinery. Tekhnika i oborudovaniye dlya sela = Machinery and Equipment for Countryside. 2017; 5:26–31. (In Russ.)

26. Lezin P. P., Komarov V. A., Vlaskin V. V., Ovchinnikov A. Yu. Repair of turbochargers of agricultural machinery engines. Tekhnika i oborudovaniye dlya sela = Machinery and Equipment for Countryside. 2017; 8:40–45. (In Russ.)

 

Лицензия Creative Commons
This work is licensed under a Creative Commons Attribution 4.0 License.